APPLICATION OF AN AMPEROMETRIC SENSOR TO IN-LINE MONITORING OF PULP BLEACHING WITH CHLORINE DIOXIDE

Chlorine dioxide is replacing chlorine as the active compound in pulp bleaching in order to reduce the amount of chlorine used in the process and hence also in the waste waters. In bleaching with chlorine dioxide part of the effective bleaching chemical is usually chlorite. The electrochemistry of chlorine dioxide and chlorite at solid electrodes was studied by cyclic voltammetry at different pH values. The observed voltammograms indicated that reduction of chlorine dioxide gives chlorite and oxidation of chlorite gives chlorine dioxide. Both voltammograms were well developed, indicating a reversible process. Both platinum and glassy carbon were used as the working electrode. The dependence of the limiting current of chlorine dioxide and chlorite on pH was studied at both electrodes. The method was tested in the chlorine dioxide bleaching stage D1 in a typical bleaching process. A good correlation was found between the concentrations of chlorine dioxide and chlorite measured by the in-line amperometric method and a standard titrimetric method. © 1990.