MECHANICAL-PROPERTIES OF BLENDS OF NYLON WITH CHEMICALLY-MODIFIED ABS

被引:15
作者
NELSON, TJ
SUBRAMANIAN, N
机构
[1] Department of Chemical Engineering, Indian Institute of Technology, Madras
关键词
NYLON-6; MODIFIED ABS (MABS); BLENDS; TENSILE; FLEXURAL; IMPACT PROPERTIES AND MORPHOLOGY;
D O I
10.1002/pi.4990320403
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Tensile. flexural and impact properties were measured of a heterogeneous polymer blend system, consisting of nylon 6 and a chemically modified ABS (MABS). It was found from the tensile tests that nylon-richer blends show yielding behaviour and nylon-leaner blends show necking behaviour. The addition of MABS increases the modulus. whereas the tensile strength and percentage elongation at break decrease and go through a minimum. The impact strength is increased to a maximum of approximately three times when 20 wt% of MABS is added to nylon 6. In order to interpolate the mechanical properties observed, empirical equations are given which are found to describe the experimental data rather well. Photomicrographs were taken of the tensile fractured surfaces using a scanning electron microscope.
引用
收藏
页码:343 / 347
页数:5
相关论文
共 17 条
[1]  
CHIN WK, 1987, SPE ANTEC, P155
[2]   MECHANICAL-PROPERTIES OF BLENDS OF NYLON-6 WITH A CHEMICALLY MODIFIED POLYOLEFIN [J].
CHUANG, HK ;
HAN, CD .
JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (01) :165-177
[3]   BLENDS OF NYLON-6 WITH AN ETHYLENE-BASED MULTIFUNCTIONAL POLYMER .2. PROPERTY-MORPHOLOGY RELATIONSHIPS [J].
CHUANG, HK ;
HAN, CD .
JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (06) :2457-2474
[4]   TOUGHENING OF NYLON-6 BY MODIFIED POLYETHYLENES [J].
DEANIN, RD ;
ORROTH, SA ;
BHAGAT, RI .
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 1990, 29 (03) :289-295
[5]  
FUJINO K, 1964, J APPL POLYM SCI, V8, P2147
[6]   BLENDS OF NYLON-6 WITH AN ETHYLENE-BASED MULTIFUNCTIONAL POLYMER .1. RHEOLOGY-STRUCTURE RELATIONSHIPS [J].
HAN, CD ;
CHUANG, HK .
JOURNAL OF APPLIED POLYMER SCIENCE, 1985, 30 (06) :2431-2455
[7]   A VARIATIONAL APPROACH TO THE THEORY OF THE ELASTIC BEHAVIOUR OF MULTIPHASE MATERIALS [J].
HASHIN, Z ;
SHTRIKMAN, S .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1963, 11 (02) :127-140
[8]   TOUGHENED NYLON RESINS [J].
HOBBS, SY ;
BOPP, RC ;
WATKINS, VH .
POLYMER ENGINEERING AND SCIENCE, 1983, 23 (07) :380-389
[9]   STRUCTURE-PROPERTY RELATIONSHIPS IN POLYAMIDE ACRYLONITRILE-BUTADIENE-STYRENE (ABS) BLENDS [J].
HOWE, DV ;
WOLKOWICZ, MD .
POLYMER ENGINEERING AND SCIENCE, 1987, 27 (21) :1582-1590
[10]  
HOWE DV, 1986, SPE ANTEC TECH PAPER, P324