Effect of parameters of compressed air system on performances for the engine

被引：2

作者：

School of Mechanical and Automotive Engineering, Hefei University of Technology, Hefei 230009, China ^{[1
]}

不详 ^{[2
]}

机构：

[1] School of Mechanical and Automotive Engineering, Hefei University of Technology

[2] State Key Laboratory of Automotive Safety and Energy, Tsinghua University

来源：

Jixie Gongcheng Xuebao/Chinese Journal of Mechanical Engineering | 2008年 / 44卷 / 04期

关键词：

Compressed air engine; Flowmaster flow software; Performance;

D O I：

10.3901/JME.2008.04.211

中图分类号：

学科分类号：

摘要：

Instantaneous state analysis method is used to set up a mathematic model for compressed air engine, and fluid flow software Flowmaster flow software is used for research on the effect of parameters of compressed air system on performances for the engine. Through simulation, approach and method are brought out for increasing compressed air engine power performance and meliorate its economy performance. Research results indicate the following the pressure in the cylinder are increased by shortening up or down stream pipe length before or behind the inlet valve, and expanding upstream pipe diameter; The relation between downstream pipe diameter and charge quality is based on the Mach number in the downstream pipe of inlet valve; Indicative power is increased by expending exhaust valve diameter and adopting appropriate intake advance angle; Enhancing the pressure in the cylinder, improving the efficiency of intake air, increasing the indicative power are beneficial to improve power and economy performances for the compressed air engine.

引用

页码：211 / 216

页数：5

共 12 条

[1]

Chen Y., Xu H., Tao G., Research and progress of the compressed air power vehicle, Chinese Journal of Mechanical Engineering, 38, 11, pp. 7-11, (2002)

[2]

Xu H., Compressed air driven vehicle, Automobile Technology, 7, pp. 5-7, (2002)

[3]

Xu H., The feasibility research of compressed-air powered vehicle, China Mechanical Engineering, 13, 17, pp. 1512-1515, (2002)

[4]

Jia G., Wang X., Wu G., Viewing on applications and developments of the compressed air power, China Mechanical Engineering, 17, 15, pp. 1190-1194, (2004)

[5]

Knowlen C., Williams J., Mattick A.T., Quasi-isothermal expansion engines for liquid nitrogen automotive propulsion, (1997)

[6]

Knowlen C., Mattick A.T., Bruckner A.P., High efficiency energy conversion systems for liquid nitrogen automobile, (1998)

[7]

Liu H., Chen Y., Tao G., A study on the valve train system of compressed air powered engine, China Mechanical Engineering, 15, 18, pp. 1668-1671, (2004)

[8]

Yu X., Yuan G., Shen Y., Theoretical analysis of air powered engine work cycle, Chinese Journal of Mechanical Engineering, 38, 9, pp. 118-122, (2002)

[9]

Jia G., Wang X., Chen Y., Study on energy system of compressed air powered car, Journal of Zhejiang University (Engineering Science), 37, 11, pp. 715-718, (2003)

[10]

An D., Tan J., Zuo C., Designing and experiment of a compressed-air engine, Journal of Hefei University of Technology, 38, 9, pp. 118-122, (2005)

← 1 2 →