A method of bearing fault feature extraction based on improved wavelet packet and hilbert analysis

被引：1

作者：

Yang J. ^{[1
]}

Yao D. ^{[2
]}

Cai G. ^{[2
]}

Liu H. ^{[3
]}

Zhang J. ^{[3
]}

机构：

[1] School of Mechanical-electronic and Automobile Engineering, Beijing University of Civil Engineering and Architecture, Beijing

[2] State Key Laboratory of Rail Traffic Control and Safety, Beijing Jiaotong University, Beijing

[3] School of Machine-electricity Engineering, Taiyuan University of Science and Technology

来源：

International Journal of Digital Content Technology and its Applications | 2010年 / 4卷 / 04期

关键词：

City rail vehicle; Experimental research; Fault feature extraction; Hilbert transform; Improved wavelet packet; Rolling bearing of traction motor; Running gear;

D O I：

10.4156/jdcta.vol4.issue4.13

中图分类号：

学科分类号：

摘要：

In order to supply a gap of current resonance vibration and STFT demodulation method applied to rolling bearing fault feature extraction of city rail vehicle, a fault diagnosis method for rolling bearing is presented, which is based on the integration of improved wavelet packet, frequency energy analysis and Hilbert marginal spectrum. When faults occur in rolling bearing, the energy of the rolling bearing vibration signal would change correspondingly, while the Hilbert energy spectrum can exactly provide the energy distribution of the signal in certain frequency with the change of the time and frequency. Thus, the fault information of the rolling bearing can be extracted effectively from the improved wavelet packet and Hilbert energy spectrum. The experimental result proves that the fault characteristic extracted by improved wavelet packet and Hilbert transform is in accord with the one analyzed from theory, and the fault feature extraction method is effective. The research results provide the theoretical foundation for the extraction of fault feature in rotary machine and have important practical value.

引用

页码：127 / 139

页数：12

共 18 条

[1] Bing-Lin Z., Ren H., Mechanical Failure Diagnostics[M], pp. 298-299, (2006)
[2] Bang-Xi H., Research of double charactistic analytic method based on the techniques of demodulation in fault diagnosis of bearing, Journal of Mechanical Strength, 28, 6, pp. 948-952, (2006)
[3] Choy F.K., Mugler D.H., Zhou J., Damage identification of a gear transmission using vibration signatures [j], Journal of Mechanical Design, Transactions of the ASME, 125, 2, pp. 394-403, (2003)
[4] Choi H.I., Williams W.J., Improved time-frequency re-presentation of multi-component signals using exponential kernels[J], IEEE Transactions on Acoustics, Speech and Signal Processing, 35, 6, pp. 862-871, (1989)
[5] Xiao-Yi H.U., Qing-Fu H.E., Hua-Sheng W., Rolling bearing fault detection based on svd de noising and stft demodulation method[J], CHINA RAILWAY SCIENCE, 29, 3, pp. 95-100, (2008)
[6] Xia-Wan D., Bao L., Jin-Zhao L., Et al., Fault diagnosis of freight car rolling element bearings with adaptive short-time fourier transform[J], CHINA RAILWAY SCIENCE, 26, 6, pp. 24-27, (2005)
[7] Nikolaou N.G., Antoniadis I.A., Rolling element bearing fault diagnosis using wavelet packets[J], NDT & E International, 35, 3, pp. 197-205, (2002)
[8] Jun Q., Ling Y., Application of wavelet packets analysis to the fault diagnosis of rotating machinery [J], ELECTRONIC ENGINEER, 32, 1, pp. 48-50, (2006)
[9] Guiji T., Degong F., Aijun H., Fault diagnosis of rotation machine based on wavelet packet energy eigenvector neural networ, Turbine Technology, 48, 3, pp. 215-217, (2006)
[10] Sheen Y. T., 3D spectral analysis for vibration signals by wavelet-based demodulation[J], Mechanical Systems and Signal Processing, 20, 4, pp. 843-853, (2006)

← 1 2 →