挥发性有机废气净化技术研究进展

被引:50
作者
樊奇
羌宁
机构
[1] 同济大学环境科学与工程学院
关键词
挥发性有机物; 生物降解法; 等离子体; 吸附; 催化氧化;
D O I
10.14034/j.cnki.schj.2005.04.012
中图分类号
X701 [废气的处理与利用];
学科分类号
摘要
本文对生物净化技术、等离子体净化技术、吸附和催化氧化技术在控制废气中挥发性有机物的研究进展及应用进行了综述。气体生物净化技术在VOCs混合物和改进设备工艺方面开展的研究工作较多,等离子体净化技术与催化技术的组合越来越受到关注。吸附和催化氧化方面则着重在吸附剂(活性炭和沸石)吸附性能的进一步研究和新型催化剂的研制。
引用
收藏
页码:40 / 44+49 +49
页数:6
相关论文
共 30 条
[1]  
Removal of acylonitrile and styrene mixtures from waste gases by a trickle-bed air biofiler. C Lu,M - R Lin,I Wey. Bioprocess and Biosystems Engineering . 2002
[2]   Biodegradation of volatile organic compounds by five fungal species [J].
Qi, B ;
Moe, WM ;
Kinney, KA .
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY, 2002, 58 (05) :684-689
[3]  
Effects of adsorption and temperature on a nonthermal plasma process for removing VOCs. Song Young-Hoon,Seock-Joon Kim,Kyung-Il Choi,Toshiaki Yamamoto. Journal of Electrostatics . 2002
[4]  
Catalytic oxidation of chlorinated hydrocarbons in two-component mixtures with selected VOCs. Anna Musialik-Piotrowska,Bozena Mendyka. Catalysis Today . 2004
[5]  
Characterization and catalytic activity of Pd/V2 O5 /Al2 O3 catalysts on benzene total oxidation. R S G Ferreira,P G P de Oliveira,F B Noronha. Applied Catalysis . 2004
[6]  
Construction of a Low-Pressure Microwave Plasma Reactor and Its Application in the Treatment of Volatile Organic Compouds. Yet-Pole I,et al. Environmental Science and Technology . 2004
[7]  
Destruction of hydrocarbons in non-thermal, ambient-pressure, capillary discharge plasmas. A Koutsospyros,S -M Yin,C Christodoulatos,K Becher. International Journal of Mass Spectrometry . 2004
[8]  
Adsorption of volatile organic compounds by pecan shell and almond shell-based granular activated carbons. R R Bansode,J N Losso,W E Marshall,R M Rao,R J Portier. Bioresource Technology . 2003
[9]   真菌降解挥发性有机污染物的特性与影响因素 [J].
李琳 ;
刘俊新 .
环境污染治理技术与设备, 2003, (03) :1-5
[10]   Removal of acrylonitrile and styrene mixtures from waste gases by a trickle-bed air biofilter [J].
Lu, C ;
Lin, MR ;
Wey, I .
BIOPROCESS AND BIOSYSTEMS ENGINEERING, 2002, 25 (01) :61-67