椭球形颗粒动力效应模型(DEM)构建方法的比较(英文)

被引:5
作者
陶贺 [1 ]
钟文琪 [2 ]
金保升 [2 ]
机构
[1] School of Civil Construction,Zhengzhou Institute of Aeronautical Industry Management
[2] School of Energy & Environment,Southeast
关键词
ellipsoidal particle; multi-element model; moving bed; discrete element model; construction method;
D O I
暂无
中图分类号
O572.2 [粒子物理学];
学科分类号
摘要
Discrete element model was developed to simulate the ellipsoidal particles moving in the moving bed.Multi-element model was used to describe a ellipsoidal particle,the contact detection algorithm of ellipsoidal particle was developed,and both contact force and gravity force were considered in the models.The simulation results were validated by our experiment.Three algorithms for representing an ellipsoidal particle were compared in macro and micro aspects.The results show that there exists big difference in the microscopic parameters such as kinetic energy,rotational kinetic energy,deformation,contact force and collision number which leads to the difference of macroscopic parameters.The relative error in the discharge rate and tracer particle position is the largest between 3-tangent-element representation and experimental results.The flow pattern is similar for the 5-element and 3-intersection representations.The only difference is the discharge rate of 5-element representation is larger than the experimental value and that of the 3-intersection representation has the contrary result.Finally the 3-intersectionelement representation is chosen in the simulation due to less computing time than that of the 5-element representation.
引用
收藏
页码:800 / 807
页数:8
相关论文
共 11 条
[1]  
A study of influence of gravity on bulk behaviour of particulate solid[J]. Yun-Chi Chung,Jin Yeam Ooi. Particuology. 2008(06)
[2]   Predicting discharge dynamics from a rectangular hopper using the discrete element method (DEM) [J].
Anand, Anshu ;
Curtis, Jennifer S. ;
Wassgren, Carl R. ;
Hancock, Bruno C. ;
Ketterhagen, William R. .
CHEMICAL ENGINEERING SCIENCE, 2008, 63 (24) :5821-5830
[3]   A method for predicting hopper flow characteristics of pharmaceutical powders [J].
Faqih, AbdulMobeen N. ;
Alexander, Albert W. ;
Muzzio, Fernando J. ;
Tomassone, M. Silvina .
CHEMICAL ENGINEERING SCIENCE, 2007, 62 (05) :1536-1542
[4]   Flow of sphero-disc particles in rectangular hoppers - a DEM and experimental comparison in 3D [J].
Lia, JT ;
Langston, PA ;
Webb, C ;
Dyakowski, T .
CHEMICAL ENGINEERING SCIENCE, 2004, 59 (24) :5917-5929
[5]   Kinematic model for granular flow in a two-dimensional flat-bottomed hopper [J].
Chou, CS ;
Hsu, JY .
ADVANCED POWDER TECHNOLOGY, 2003, 14 (03) :313-331
[6]  
DEM modelling of industrial granular flows: 3D case studies and the effect of particle shape on hopper discharge[J] . Paul W Cleary,Mark L Sawley. Applied Mathematical Modelling . 2002 (2)
[7]   An approach to simulate the motion of spherical and non-spherical fuel particles in combustion chambers [J].
Dziugys, A ;
Peters, B .
GRANULAR MATTER, 2001, 3 (04) :231-265
[8]  
Discrete element simulations of dense packings and heaps made of spherical and non-spherical particles[J] . H.G. Matuttis,S. Luding,H.J. Herrmann. Powder Technology . 2000 (1)
[9]  
Shape representation of axi-symmetrical, non-spherical particles in discrete element simulation using multi-element model particles[J] . J.F. Favier,M.H. Abbaspour-Fard,M. Kremmer,A.O. Raji. Engineering Computations . 1999 (4)
[10]   Numerical simulation of the gas-solid flow in a fluidized bed by combining discrete particle method with computational fluid dynamics [J].
Xu, BH ;
Yu, AB .
CHEMICAL ENGINEERING SCIENCE, 1997, 52 (16) :2785-2809