±800kV特高压直流输电工程换流站主设备规范(英文)

被引:10
作者
杨一鸣
张蕾
机构
[1] State Power Economic Research Institute
[2] State Grid Corporation of China
关键词
D O I
暂无
中图分类号
TM721.1 [直流制输电];
学科分类号
080802 [电力系统及其自动化];
摘要
Up to now,±800 kV ultra high voltage direct current(UHVDC) systems have the highest voltage level among existing DC systems in the world,thus the specification of the main equipments in the system’s converter stations should be set carefully.Taking the system design and consultation of the Jinping-Sunan ±800 kV UHVDC transmission project as an example,its specification of main equipments and key system technical parameters are presented and studied.The method of selecting parameters of station main equipment and the simulation result of system study are presented,in order to make a general description of ±800 kV UHVDC co-system studies,such as system single line diagram(SLD) insulation margin,overload capability,transformer parameter,valve short current stress,and DC breaker study.As a result of the studies above,the surge arrester configuration of UHVDC system,insulation margin,overload capability,electrical design of valve and transformer had been given out in this paper.These specifications gave support to the development of equipment and construction of the project,and generalize experiences for future UHVDC project designs.
引用
收藏
页码:3235 / 3239
页数:5
相关论文
共 9 条
[1]
高压直流断路器技术 [J].
王帮田 .
高压电器, 2010, 46 (09) :61-64+68
[2]
特高压直流换流变压器试验标准和要求的探讨(英文) [J].
Yanny Fu ;
Peter Vaessen ;
Wilco Rorijs ;
Mark Louwerse .
南方电网技术, 2009, 3 (03) :1-6
[3]
±800kV特高压直流输电系统用直流断路器研究 [J].
李宾宾 ;
苟锐锋 ;
张万荣 .
电力设备, 2007, (03) :8-11
[4]
冲击电压在2台特高压直流平波电抗器之间的分布情况研究 [J].
吴玉坤 ;
郭香福 ;
姚斯立 ;
杜炜 .
电力设备, 2007, (03) :20-23
[5]
±800kV直流干式平波电抗器的技术规范 [J].
乐波 ;
张燕秉 ;
郑劲 ;
聂定珍 .
高电压技术, 2006, (12) :170-173
[6]
±800kV 6400MW特高压直流输电工程设计 [J].
舒印彪 ;
刘泽洪 ;
高理迎 ;
王绍武 .
电网技术, 2006, (01) :1-8
[7]
我国高压直流输电工程国产化回顾及现状[J] 常浩 高电压技术 2004, 11
[8]
中国直流输电的现状及展望[J] 舒印彪 高电压技术 2004, 11
[9]
Thyristor valves for high voltage direct current(HVDC)power transmission?part1:electrical testing IEC60700-1 1998,