稻壳炭基高比表面多孔氧化硅的表征及Cu(Ⅱ)吸附特性

被引:23
作者
李大伟
陈登宇
朱锡锋
机构
[1] 中国科学技术大学安徽省生物质洁净能源重点实验室
关键词
多孔氧化硅; 稻壳炭; 铜; 吸附;
D O I
暂无
中图分类号
O647.33 [吸附剂];
学科分类号
070305 [高分子化学与物理];
摘要
以热解稻壳炭为原料,H3PO4为酸化剂,聚乙二醇为模板剂,制得了多孔氧化硅;采用N2吸脱附、X射线荧光光谱、X射线能谱、X射线衍射等测试技术表征了制得的多孔氧化硅,采用批量吸附实验考察了它对水溶液中Cu(Ⅱ)的吸附特性。结果表明:以稻壳炭为原料,可以在10h内制得比表面积达957m2.g-1、二氧化硅含量为99.26%的无定形多孔氧化硅;该氧化硅含有中孔与微孔,中孔率为38.6%。在Cu(Ⅱ)初始浓度为20~120mg.L-1时,它对Cu(Ⅱ)的最大吸附量、最高脱除效率分别为77mg.g-1、97%;该多孔氧化硅对铜的吸附符合Freundlich等温线及准二级动力学模型。
引用
收藏
页码:3434 / 3439
页数:6
相关论文
共 11 条
[1]
Preparation of organically functionalized silica gel as adsorbent for copper ion adsorption.[J]..Journal of Environmental Sciences.2009, 11
[2]
高比表面积煤质活性炭的制备与活化机理 [J].
王秀芳 ;
田勇 ;
张会平 .
化工学报, 2009, 60 (03) :733-737
[3]
Production of porous silica by the combustion of rice husk ash for tundish lining [J].
Ahmed, Y. M. Z. ;
Ewais, E. M. ;
Zaki, Z. I. .
JOURNAL OF UNIVERSITY OF SCIENCE AND TECHNOLOGY BEIJING, 2008, 15 (03) :307-313
[4]
纳米二氧化硅对铜离子吸附性能的研究 [J].
董兵海 ;
王世敏 ;
许祖勋 ;
马年方 .
湖北大学学报(自然科学版), 2007, (01) :60-62
[5]
超临界水和水蒸气活化制备酚醛树脂基活性炭的对比研究 [J].
蔡琼 ;
黄正宏 ;
康飞宇 .
新型炭材料, 2005, (02) :122-128
[6]
Synthesis of mixed-phase uniformly infiltrated SBA-3-like in SBA-15 bimodal mesoporous silica from rice husk ash [J].
Jullaphan, O. ;
Witoon, T. ;
Chareonpanich, M. .
MATERIALS LETTERS, 2009, 63 (15) :1303-1306
[7]
Effect of acidity on the formation of silica–chitosan hybrid materials and thermal conductive property [J].
Thongthai Witoon ;
Metta Chareonpanich ;
Jumras Limtrakul .
Journal of Sol-Gel Science and Technology, 2009, 51 :146-152
[8]
Removal of copper (II) and lead (II) ions from aqueous solutions by adsorption on activated carbon from a new precursor hazelnut husks.[J].Mustafa Imamoglu;Oktay Tekir.Desalination.2008, 1
[9]
Adsorption of copper and zinc from aqueous solutions by using natural clay [J].
Veli, Sevil ;
Alyuez, Bilge .
JOURNAL OF HAZARDOUS MATERIALS, 2007, 149 (01) :226-233
[10]
Adsorption of Cd(II) and Cu(II) from aqueous solution by carbonate hydroxylapatite derived from eggshell waste.[J].Wei Zheng;Xiao-ming Li;Qi Yang;Guang-ming Zeng;Xiang-xin Shen;Ying Zhang;Jing-jin Liu.Journal of Hazardous Materials.2007, 1