三峡库区大宁河流域非点源污染研究

被引:17
作者
许其功 [1 ]
席北斗 [1 ]
何连生 [1 ]
魏自民 [2 ]
姚波 [1 ]
霍守亮 [1 ]
机构
[1] 中国环境科学研究院
[2] 东北农业大学生命科学学院
关键词
非点源污染; 验证; 营养物质; 模拟;
D O I
暂无
中图分类号
X524 [湖泊、水库];
学科分类号
摘要
以大宁河流域巫溪水文站控制流域为研究对象,应用分布式非点源污染模型SWAT,利用实测流量、泥沙负荷及氮、磷负荷数据对模型进行了率定和验证,并模拟了大宁河流域的径流量和营养物质氮、磷的排放。结果表明,月平均流量在率定期和验证期的效率系数分别达到了0.93和0.62;泥沙负荷的效率系数分别为0.70和0.34;氨氮和总磷的效率系数分别达到了0.31和0.37。大宁河流域污染物质的排放存在着较大的空间差异,有机氮和有机磷的5年平均排放量区间分别为2.01~38.15和0.35~5.89 kg/(hm2.a),其中,流域西南部子流域的有机氮和有机磷平均排放量最大,分别为38.15和5.89 kg/(hm2.a),是大宁河流域污染物排放的最敏感区域。
引用
收藏
页码:299 / 303
页数:5
相关论文
共 12 条
  • [1] 三峡工程Ⅱ期蓄水对支流富营养化的影响
    李永建
    李斗果
    王德蕊
    [J]. 西南农业大学学报(自然科学版), 2005, (04) : 474 - 478
  • [2] 非点源污染模拟的空间分割优化
    胡远安
    程声通
    贾海峰
    [J]. 清华大学学报(自然科学版), 2005, (03) : 367 - 370
  • [3] 一种可用于表征土地利用变化水文效应的水文模型探讨──SWAT模型在云州水库流域的应用研究
    张蕾娜
    李秀彬
    王兆锋
    李星
    [J]. 水文, 2004, (03) : 4 - 8
  • [4] 基于SWAT模型的基流估算及评价——以洛河流域为例
    杨桂莲
    郝芳华
    刘昌明
    张雪松
    [J]. 地理科学进展, 2003, (05) : 463 - 471
  • [5] 三峡水库重庆段一级支流回水河段富营养化潜势研究
    刘永明
    贾绍凤
    蒋良维
    张士锋
    [J]. 地理研究, 2003, (01) : 67 - 72
  • [6] Sensitivity analysis for hydrology and pesticide supply towards the river in SWAT[J] . K. Holvoet,A. van Griensven,P. Seuntjens,P.A. Vanrolleghem.Physics and Chemistry of the Earth . 2005 (8)
  • [7] Application of the SWAT model on the Medjerda river basin (Tunisia)[J] . F. Bouraoui,S. Benabdallah,A. Jrad,G. Bidoglio.Physics and Chemistry of the Earth . 2005 (8)
  • [8] Modelling nitrogen pressure in river basins: A comparison between a statistical approach and the physically-based SWAT model[J] . B. Grizzetti,F. Bouraoui,G. De Marsily.Physics and Chemistry of the Earth . 2005 (8)
  • [9] Sensitivity of simulated hydrological fluxes towards changes in soil properties in response to land use change[J] . J.A. Huisman,L. Breuer,H.-G. Frede.Physics and Chemistry of the Earth . 2004 (11)
  • [10] Identification and prioritisation of critical sub-watersheds for soil conservation management using the SWAT model
    Tripathi, MP
    Panda, RK
    Raghuwanshi, NS
    [J]. BIOSYSTEMS ENGINEERING, 2003, 85 (03) : 365 - 379