基于单模-多模-单模光纤模间干涉的温度传感特性研究

被引:14
作者
黄泽铗
李强
徐雅芹
张凌云
史冀
刘岚岚
赵红敏
范玲
王智
机构
[1] 北京交通大学理学院光信息科学与技术研究所发光与光信息技术教育部重点实验室
基金
北京市自然科学基金; 高等学校博士学科点专项科研基金;
关键词
光纤光学; 光纤温度传感; 单模-多模-单模光纤结构; 模间干涉; Hilbert变换;
D O I
暂无
中图分类号
TP212 [发送器(变换器)、传感器]; TN253 [光纤元件];
学科分类号
080202 ;
摘要
基于单模-多模-单模(SMS)光纤输出光功率随温度的变化规律,提出了一种温度测量的理论模型,并实现了一种新型的测温系统。通过测量光功率变化的相位即可得到与之呈线性关系的温度变化。通过两个温度变化过程对该系统进行定标,得到相位与温度之间的定标系数为2.5347。对自然快速升温和线性缓慢升温两个过程进行了实验测试,系统误差小于5%。
引用
收藏
页码:203 / 208
页数:6
相关论文
共 8 条
[1]  
Fiber-optic temperature sensor based oninterference of selective higher-order modes. Li Enbang,Wang Xiaolin,Zhang Chao. Applied Physics . 2006
[2]  
Multimode interference fiber optic temperature sensor. J.G.Aguilar-Soto,J.E.Antonio-Lopez,J.J.Sanchez-Mondragonet al. Latin America Optics and Photonics Conference (LAOP) . 2010
[3]  
Investigation on singlemode multimode singlemode fiber structure. Wang Q,Farrell G,Yan W. Journal of Lightwave Technology . 2008
[4]  
Sensitivity-Enhanced Fiber-Optic Strain Sensor Based on Interference ofHigher Order Modes in Circular Fibers. Enbang Li. IEEE Photonics Technology Letters . 2007
[5]  
Strain and temperature sensing characteristics ofsingle-mode–multimode–single-mode structures. Saurabh Mani Tripathi,Arun Kumar,Ravi K Varshney,Y. Bala Pavan Kumar,EmmanuelMarin,Jean-Pierre Meunier. Journal of Lightwave Technology . 2009
[6]  
Design of asingle-multimode-single-mode filter demodulator for fiber Bragg grating sensorsassisted by mode observation. Jianzhong Zhang,Weimin Sun,Libo Yuan,Gang-Ding Peng. Applied Optics . 2009
[7]  
Low-cost high-sensitivity strain andtemperature sensing using graded-index multimode fibers. YU Liu,LI Wei. Applied Optics . 2007
[8]  
Wavelength tunable fiber lens based on multimode interference. Waleed S Mohanmmed,Alok Mehta,Eric G. Johnson. Journal of Lightwave Technology . 2004