磷酸亚铁锂材料的研究与发展

被引:4
作者
费定国 [1 ,2 ]
林逸全 [1 ,2 ]
机构
[1] “国立中央大学”化学工程与材料工程系
[2] 倍特利能源科技股份有限公司
关键词
磷酸亚铁锂; 阴极材料; 锂离子电池;
D O I
暂无
中图分类号
TM912 [蓄电池];
学科分类号
0808 ;
摘要
目前全球高动力锂离子电池系统的发展主要集中在锂锰电池、锂钴镍锰电池以及锂铁电池,其中磷酸亚铁锂材料具有高电容量、高放电功率、极佳的长循环寿命以及良好的热稳定性与高温性能等优点,已成为动力锂离子电池首选的高安全性正极材料。然而,磷酸亚铁锂材料在工业化量产时,必须解决电池芯加工性差及材料一致性不佳等问题,作者曾结合多项新颖观念与技术于磷酸亚铁锂材料制做过程,在粉体表面涂布碳层,在晶体内部掺杂金属,分别改善材料电导率与锂离子扩散速度以及有效地控制碳含量、粉体比表面积、碳层均匀性、粒径大小与分布,制备出高质量磷酸亚铁锂产品。该文将回顾并探讨上述研发工作的一些重要结果。
引用
收藏
页码:103 / 111
页数:9
相关论文
共 12 条
[1]  
Effects of different iron sources on the performance of LiFePO4/C composite cathode materials[J]. Fei Gao1) , Zhiyuan Tang1), and Jianjun Xue2) 1) School of Chemical Engineering and Technology, Tianjin University, Tianjin 300072, China 2) Great Power Battery Co. Ltd., Guangzhou 511483, China.Journal of University of Science and Technology Beijing. 2008(06)
[2]  
Characterization and electrochemical properties of high tap-density LiFePO 4 /C cathode materials by a combination of carbothermal reduction and molten salt methods[J] . George Ting-Kuo Fey,Yi-Chuan Lin,Hsien-Ming Kao.Electrochimica Acta . 2012
[3]   Preparation and characterization of Ti4+-doped LiFePO4 cathode materials for lithium-ion batteries [J].
Wu, She-huang ;
Chen, Mao-Sung ;
Chien, Chao-Jung ;
Fu, Yen-Pei .
JOURNAL OF POWER SOURCES, 2009, 189 (01) :440-444
[4]   Rapid microwave-solvothermal synthesis of phospho-olivine nanorods and their coating with a mixed conducting polymer for lithium ion batteries [J].
Murugan, A. Vadivel ;
Muraliganth, T. ;
Manthiram, A. .
ELECTROCHEMISTRY COMMUNICATIONS, 2008, 10 (06) :903-906
[5]   High-power LiFePO4 cathode materials with a continuous nano carbon network for lithium-ion batteries [J].
Chen, Jin-Ming ;
Hsu, Chia-Haw ;
Lin, Yu-Run ;
Hsiao, Mei-Hui ;
Fey, George Ting-Kuo .
JOURNAL OF POWER SOURCES, 2008, 184 (02) :498-502
[6]   Is small particle size more important than carbon coating?: An example study on LiFePO4 cathodes [J].
Gaberscek, Miran ;
Dominko, Robert ;
Jamnik, Janez .
ELECTROCHEMISTRY COMMUNICATIONS, 2007, 9 (12) :2778-2783
[7]   Hydrothermal synthesis of high surface LiFePO4 powders as cathode for Li-ion cells [J].
Meligrana, G. ;
Gerbaldi, C. ;
Tuel, A. ;
Bodoardo, S. ;
Penazzi, N. .
JOURNAL OF POWER SOURCES, 2006, 160 (01) :516-522
[8]  
Physical and electrochemical properties of LiFePO 4 /carbon composite synthesized at various pyrolysis periods[J] . Kuei-Feng Hsu,Sun-Yuan Tsay,Bing-Joe Hwang.Journal of Power Sources . 2005 (1)
[9]   Synthesis and electrochemical properties of olivine LiFePO4 as a cathode material prepared by mechanical alloying [J].
Kwon, SJ ;
Kim, CW ;
Jeong, WT ;
Lee, KS .
JOURNAL OF POWER SOURCES, 2004, 137 (01) :93-99
[10]  
Reduction Fe3+ of Impurities in LiFePO4 from Pyrolysis of Organic Precursor Used for Carbon Deposition .2 Salah A A,Mauger A,Zaghib K,Goodenough J B,Ravet N,Gauthier M,Gendron F,Julien C M. J. Electrochem. Soc . 2006