径向低速大转矩水液压马达定子曲线特性分析

被引:8
作者
高殿荣
王志强
赵一楠
机构
[1] 燕山大学机械工程学院
基金
高等学校博士学科点专项科研基金;
关键词
水液压马达; 输出转矩; 转速; 转矩脉动; 转速脉动; 接触应力;
D O I
10.13841/j.cnki.jxsj.2012.09.017
中图分类号
TH137.51 [液压马达、液压缸和泵];
学科分类号
080401 ; 080704 ;
摘要
提出了一种采用自然水(含海水和淡水)作为液压介质进行工作的径向低速大转矩马达。研究了不同类型运动规律下的定子曲线相对应的马达输出转矩及其脉动、输出转速及其脉动、接触应力等特性,并对相关特性进行了详细的分析。分析结果表明,具有过渡区的等加速运动规律下的定子曲线,其相应的马达输出转矩和转速变化较为均匀,转矩脉动和最大接触应力相对都比较小。其余几种运动规律下的定子曲线相对应的水压马达在各方面的综合特性上则相对要差一些。通过对水压马达定子曲线特性的分析,得到了马达输出转矩、转速、脉动率和接触应力的一些重要结论,对径向低速大转矩海淡水液压马达的设计和研发具有重要意义。
引用
收藏
页码:29 / 35+40 +40
页数:8
相关论文
共 16 条
[1]  
Fault degradation assessment of water hydraulic motor by impulse vibration signal with Wavelet Packet Analysis and Kolmogorov–Smirnov Test[J] . H.X. Chen,Patrick S.K. Chua,G.H. Lim. &nbspMechanical Systems and Signal Processing . 2008 (7)
[2]  
液压元件[M]. 机械工业出版社 , 何存兴 主编, 1982
[3]  
Simultaneous temperature measurements of bearing and seal parts of a swash plate type axial piston pump — effects of piston clearance and fluid property[J] . Toshiharu Kazama,Hayato Sasaki,Yukihito Narita. &nbspJournal of Mechanical Science and Technology . 2010 (1)
[4]  
Development and design optimization of water hydraulic manipulator for ITER[J] .  &nbspFusion Engineering and Design . 2009 (2)
[5]   基于水压传动的舰船高压单相细水雾灭火系统 [J].
鲁克明 ;
刘银水 ;
贺小峰 ;
李壮云 .
流体传动与控制, 2006, (04) :15-18
[6]   水压轴向桩塞泵滑靴静压支承中的惯性影响 [J].
刘桓龙 ;
柯坚 ;
王国志 ;
于兰英 ;
许明恒 .
机械工程学报, 2002, (04) :141-143
[7]   斜盘连杆式海(淡)水轴向柱塞泵及其实验研究 [J].
柯尊荣 ;
朱玉泉 .
液压与气动, 2006, (10) :72-74
[8]  
Assessment of a water hydraulic joint for remote handling operations in the divertor region[J] . G. Dubus,O. David,F. Nozais,Y. Measson,J.-P. Friconneau,J. Palmer. &nbspFusion Engineering and Design . 2008 (10)
[9]  
New approach for improvingperformance of water hydraulic and hydraulic system. Kitagawa Ato,Liu Canghai. Proceedings of the 7th International Conference on FluidPower Transmission and Control . 2009
[10]  
Research on the port valve of a water hydraulic axial pump. Y S Liu,D F Wu,L Long,S P Cao. Proc.IMechE . 2009