考虑边界润滑的间隙机构运动副接触磨损

被引:9
作者
王国庆
刘宏昭
孙百俊
机构
[1] 长安大学工程机械学院
[2] 西安理工大学机械与仪表学院
[3] 长安大学图书馆 陕西西安
[4] 陕西西安
关键词
边界润滑; 磨损; 接触; 间隙;
D O I
10.19721/j.cnki.1671-8879.2002.06.022
中图分类号
TH117 [机械摩擦、磨损与润滑];
学科分类号
080203 ;
摘要
考虑到间隙机构运动副中的边界润滑和副元素接触时的边界条件 ,采用非线性弹簧和阻尼建立了边界润滑条件下的接触摩擦模型 ,并结合摩擦学理论给出了间隙机构中运动副表面的磨损计算公式 ;通过数值仿真 ,对运动副副元素的动态接触磨损进行了分析 ,确定了副元素表面磨损最严重的区域 ,并发现副元素弹性变形速度是影响磨损的主要原因 ,副元素分离后进入碰撞时弹性变形速度大使磨损加剧 ,运动副副元素由于弹性变形而出现连续变形接触时弹性变形速度小使接触磨损减缓。
引用
收藏
页码:85 / 88
页数:4
相关论文
共 6 条
[1]  
Spring-dashopt models for the dynamics of radially rotating beam with impact. Yigit A S,Ulsoy A G,Scott R A. Journal of Sound and Vibration . 1990
[2]  
On the dynamics of intermittent motion mechanisms, part 1: Dynamic model and response. Lee T W,Wang A C. Journal of Mechanisms, Transmissions, and Automation in Design . 1983
[3]  
Impact with friction. Keller J B. J Applied Mechanical . 1986
[4]  
Friction, restitution, and energy loss in planar collisions. Brach R M. ASME J Applied Mechanical . 1984
[5]  
Dynamic response of revolute joint with clearance. Jungkeum Rhee. Mech, Mach, Theory . 1996
[6]  
Dynamic interactions of link elasticity and clearance connections in planar mechanical systems. Dubowsky S,Gardner T N. Journal of Engineering . 1975