超声波合成介孔分子筛

被引:28
作者
闰明涛
吴刚
机构
[1] 北京化工大学材料科学与工程学院
[2] 北京市新型高分子材料制备与加工重点实验室
[3] 北京市新型高分子材料制备与加工重点实验室 北京
[4] 河北大学化学与环境科学学院
[5] 保定
[6] 北京
关键词
介孔分子筛; 超声波; 合成; 结晶度;
D O I
暂无
中图分类号
O644 [光化学、辐射化学、超声波作用的化学过程];
学科分类号
070304 ; 081704 ;
摘要
Th e synthesis of mesoporous molecular sieve(MMS)abstract:by ultrasonic method was investiga ted under different ultrasonic power and time.The resultant samples were charact erized through measurements of XRD,SEM,TEM,IR,TG,and N 2 adsorption isotherm.Nanometer mesoporous silica analogous to the hexagonal M CM - 41could be obtained over a range of irradiation power above200W within short synthesis time(20min)abstract:and a quiescent time(5h)abstract:.The samples have larger BET surfa ce area and thicker pore wall while its pore size and pore volume are similar to that obtained without ultrasonic.The crystallinity of MMS increase and the size of unit cell reduce as the increasing of ultrasonic power and time.The yield of products increases with the increasing of ultrasonic power.Therefore,ultrasonic irradiation synthesis is a way to save time and energy in preparation of the me so - porous molecular sieve.
引用
收藏
页码:219 / 224
页数:6
相关论文
共 4 条
[1]   纳米介孔分子筛MCM-41的微波辐射合成法 [J].
姚云峰 ;
张迈生 ;
杨燕生 .
物理化学学报, 2001, (12) :1117-1121
[2]  
超声波在粉体材料制备中的应用[J]. 邬建辉,张传福,湛菁,吴琳琳.有色金属. 2001(03)
[3]   酸性条件下纯硅六方介孔分子筛的合成(Ⅱ)合成温度、时间的影响及其与碱性合成的比较 [J].
杨春 ;
贾雪平 ;
何农跃 ;
陆祖宏 .
无机化学学报, 2001, (02) :256-262
[4]  
Porous silica via colloidal crystallization. KresgeC T,LeonowiczM E,RothW J,VartuliJ C,BeckJ S. Nature . 1992