DMFCs用SPEEK/SiOx-S复合质子交换膜(英文)

被引:6
作者
高启君 [1 ,2 ]
王宇新 [1 ,2 ]
许莉 [1 ]
卫国强 [1 ,2 ]
王志涛 [1 ,2 ]
机构
[1] School of Chemical Engineering and Technology,Tianjin University
[2] State Key Laboratory of Chemical Engineering
关键词
sulfonated poly(ether ether ketone); functionalized silica; composite membrane; direct methanol fuel cell;
D O I
暂无
中图分类号
TB383.2 [];
学科分类号
070205 ; 080501 ; 1406 ;
摘要
A sulfonated poly(ether ether ketone)(SPEEK) membrane with a fairly high degree of sulfonation(DS) can swell excessively and even dissolve at high temperature.To solve these problems,insolvable functionalized silica powder with sulfonic acid groups(SiOx-S) was added into the SPEEK matrix(DS = 55.1%) to prepare SPEEK/SiOx-S composite membranes.The decrease in both the swelling degree and the methanol permeability of the membranes was a dose-dependent result of addition of the SiOx-S powder.Pure SPEEK membrane swelled 52.6% at 80°C,whereas the SPEEK/SiOx-S(15%,by mass) membrane swelled only 27.3% at the same temperature.From room temperature to 80℃,all SPEEK/SPEEK/SiOx-S composite membranes had methanol permeability of about o ne order of magnitude lower than that of Nafion?115.Compared with pure SPEEK membranes,the addition of the SiOx-S powder not only leads to higher proton conductivity,but also increases the dimensional stability at higher temperatures,and greater proton conductivity can be achieved at higher temperature.The SPEEK/SiOx-S(20%,by mass) membrane could withstand temperature up to 145°C,at which in 100% relative humidity(RH) its proton conductivity exceeded slightly that of Nafion?115 membrane and reached 0.17 S·cm-1,while pure SPEEK membrane dissolved at 90°C.The SPEEK/SiOx-S composite membranes are promising for use in direct methanol fuel cells because of their good dimensional stability,high proton conductivity,and low methanol permeability.
引用
收藏
页码:207 / 213
页数:7
相关论文
共 12 条
[1]   SPEEK/functionalized silica composite membranes for polymer electrolyte fuel cells [J].
Sambandam, Satheesh ;
Ramani, Vijay .
JOURNAL OF POWER SOURCES, 2007, 170 (02) :259-267
[2]  
Synthesis of the block sulfonated poly(ether ether ketone)s (S-PEEKs) materials for proton exchange membrane[J] . Chengji Zhao,Xianfeng Li,Zhe Wang,Zhiyu Dou,Shuangling Zhong,Hui Na.Journal of Membrane Science . 2006 (1)
[3]  
Structural analysis of PVA-based proton conducting membranes[J] . Solid State Ionics . 2006 (26)
[4]  
Preparation and characterization of crosslinked PVA/SiO 2 hybrid membranes containing sulfonic acid groups for direct methanol fuel cell applications[J] . Dae Sik Kim,Ho Bum Park,Ji Won Rhim,Young Moo Lee.Journal of Membrane Science . 2004 (1)
[5]  
Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK)[J] . Serguei D Mikhailenko,Keping Wang,Serge Kaliaguine,Peixiang Xing,Gilles P Robertson,Michael D Guiver.Journal of Membrane Science . 2004 (1)
[6]  
New proton exchange membranes based on poly (vinyl alcohol) for DMFCs[J] . Weilin Xu,Changpeng Liu,Xinzhong Xue,Yi Su,Yanzhuo Lv,Wei Xing,Tianhong Lu.Solid State Ionics . 2004 (1)
[7]  
Characterization of polymer blends of polyethersulfone/sulfonated polysulfone and polyethersulfone/sulfonated polyetheretherketone for direct methanol fuel cell applications[J] . Carmen Manea,Marcel Mulder.Journal of Membrane Science . 2002 (1)
[8]   Role of the ceramic fillers in enhancing the transport properties of composite polymer electrolytes [J].
Croce, F ;
Persi, L ;
Scrosati, B ;
Serraino-Fiory, F ;
Plichta, E ;
Hendrickson, MA .
ELECTROCHIMICA ACTA, 2001, 46 (16) :2457-2461
[9]   On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells [J].
Kreuer, KD .
JOURNAL OF MEMBRANE SCIENCE, 2001, 185 (01) :29-39
[10]   Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications [J].
Zaidi, SMJ ;
Mikhailenko, SD ;
Robertson, GP ;
Guiver, MD ;
Kaliaguine, S .
JOURNAL OF MEMBRANE SCIENCE, 2000, 173 (01) :17-34