考虑货车因素的高速公路短期交通流风险预测

被引:15
作者
张兰芳
赵焜
机构
[1] 同济大学道路与交通工程教育部重点试验室
关键词
高速公路; 交通安全; 货车因素; 支持向量机; 风险预测模型;
D O I
暂无
中图分类号
U491 [交通工程与交通管理];
学科分类号
082301 [道路与铁道工程];
摘要
基于G15上海段的交通流数据和交通事故数据,研究货车比例较高且货车事故率较高的高速公路短期交通流风险预测模型.分别选取整体交通流参数、货车交通流参数和综合参数作为特征变量,通过支持向量机进行建模,运用遗传算法对模型参数进行寻优,建立不同时间段、不同风险特征变量的分类模型并对比分析.结果表明事故发生前5~10min的模型预测精度最高.当加入货车因素时,总体的预测精度提高7.1%,事故预测精度提高6.1%,误报率降低4.7%.采用平均影响值法进行货车因素对预测结果的影响程度分析,表明货车因素对于预测模型有较大影响.该研究模型可用来开发交通安全预警系统,为高速公路货车安全管理提供理论依据.
引用
收藏
页码:208 / 214
页数:7
相关论文
共 11 条
[1]
Analysis of injury severity of large truck crashes in work zones.[J].Mohamed Osman;Rajesh Paleti;Sabyasachee Mishra;Mihalis M. Golias.Accident Analysis and Prevention.2016,
[2]
Stability analysis of the mixed traffic flow of cars and trucks using heterogeneous optimal velocity car-following model.[J].Da Yang;Peter (Jing) Jin;Yun Pu;Bin Ran.Physica A: Statistical Mechanics and its Applications.2014,
[3]
Utilizing support vector machine in real-time crash risk evaluation.[J].Rongjie Yu;Mohamed Abdel-Aty.Accident Analysis and Prevention.2013,
[4]
Assessment of freeway traffic parameters leading to lane-change related collisions [J].
Pande, Anurag ;
Abdel-Aty, Mohamed .
ACCIDENT ANALYSIS AND PREVENTION, 2006, 38 (05) :936-948
[5]
Comprehensive Analysis of the Relationship between Real-Time Traffic Surveillance Data and Rear-End Crashes on Freeways.[J].Anurag Pande;Mohamed Abdel-Aty.Transportation Research Record.2006, 1
[6]
Split Models for Predicting Multivehicle Crashes during High-Speed and Low-Speed Operating Conditions on Freeways.[J].Mohamed Abdel-Aty;Nizam Uddin;Anurag Pande.Transportation Research Record.2005, 1
[7]
Predicting Freeway Crashes from Loop Detector Data by Matched Case-Control Logistic Regression.[J].Mohamed Abdel-Aty;Nizam Uddin;Anurag Pande;M. Fathy Abdalla;Liang Hsia.Transportation Research Record.2004, 1
[8]
统计学习理论.[M].(美)瓦普尼克(VladimirN.Vapnik)著;许建华;张学工译;.电子工业出版社.2004,
[9]
城市快速路实时交通流运行安全主动风险评估 [J].
孙剑 ;
孙杰 .
同济大学学报(自然科学版), 2014, 42 (06) :873-879
[10]
恶劣天气下高速公路实时事故风险预测模型 [J].
徐铖铖 ;
刘攀 ;
王炜 ;
李志斌 .
吉林大学学报(工学版), 2013, 43 (01) :68-73