方波脉冲电压下聚酰亚胺薄膜降解机理(英文)

被引:2
作者
罗杨 [1 ]
吴广宁 [1 ]
夏金凤 [2 ]
朱光亚 [1 ]
王鹏 [1 ]
曹开江 [1 ]
机构
[1] School of Electrical Engineering, Southwest Jiaotong University
[2] Zhuzhou Electric Locomotive Co, Ltd, China South Locomotive & Rolling Stock Co, Ltd
关键词
inverter-fed motor; polyimide film; bipolar continuous square impulse voltage; partial discharge; aging; insulation failure; mi-; cro-morphology; degradation mechanism;
D O I
暂无
中图分类号
O631.3 [高聚物的化学性质];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Partial discharge (PD) under a sequence of high-repetition-rate square pulses is one of the key factors leading to premature failure of insulation systems of inverter-fed motors. Polyimide (PI) film is an important type of insulating material used in the inverter-fed motors. In this paper, micro-morphology and structure change of PI film aged by bipolar continuous square impulse voltage (BCSIV) with ampli- tude above partial discharge inception voltage (PDIV) are investigated by scanning electron microscope (SEM). The chemical bonds of PI chain are analyzed through Fourier transform infrared spectroscopy (FTIR). The results show that the degradation mechanism of PI film is the fracturing of chemical bonds caused by the erosion from PDs. Three layers are displayed in both 100 HN film and 100 CR film. The de- gradation path of PI film is initiated from surface and then gradually extends to the interior with continuous aging. Nano-fillers can retard the degradation of PI film and prolong its lifetime.
引用
收藏
页码:1925 / 1931
页数:7
相关论文
共 6 条
[1]   高频脉冲下牵引电机绝缘的局部放电特性 [J].
曹开江 ;
吴广宁 ;
罗杨 ;
崔易 .
高电压技术, 2012, 38 (06) :1376-1382
[2]   连续高压脉冲方波下局部放电测试系统设计 [J].
王鹏 ;
吴广宁 ;
罗杨 ;
张依强 ;
曹开江 .
高电压技术, 2012, 38 (03) :587-593
[3]   电晕强度对HTV硅橡胶陷阱特性的影响 [J].
梁英 ;
李成榕 ;
丁立健 .
高电压技术, 2009, 34 (01) :135-140
[4]   基于连续高压脉冲方波的绝缘老化试验系统 [J].
高波 ;
吴广宁 ;
佟来生 ;
林同光 .
仪器仪表学报, 2008, (01) :43-48
[5]   Degradation of polymeric materials exposed to corona discharges [J].
Zhu, Yong ;
Otsubo, Masahisa ;
Honda, Chikahisa .
POLYMER TESTING, 2006, 25 (03) :313-317
[6]  
Degradation of solid dielectrics due to internal partial discharge: some thoughts on progress made and where to go now .2 Morshuis P H F. IEEE Transactions on Dielectrics and Electrical Insulation . 2005