等离子喷涂Al2O3/TiO2纳米陶瓷复合涂层的微观结构及性能

被引:7
作者
宋仁国 [1 ,2 ]
王超 [1 ,2 ]
姜彦 [1 ,2 ]
卢果 [1 ,2 ]
机构
[1] 常州大学材料科学与工程学院
[2] 常州大学先进金属材料常州市重点实验室
关键词
等离子喷涂; 纳米陶瓷复合涂层; 微结构; 性能;
D O I
10.13289/j.issn.1009-6264.2012.s2.029
中图分类号
TG174.4 [金属表面防护技术];
学科分类号
摘要
采用等离子喷涂技术制备了不同成分的Al2O3/TiO2纳米陶瓷复合涂层,并利用X射线衍射仪(XRD)、扫描电镜(SEM)、显微硬度计和摩擦磨损试验机等分析测试手段研究了纳米陶瓷复合涂层的微观结构与性能。结果表明:纳米陶瓷复合涂层中Al2O3以α-Al2O3和γ-Al2O3两相共存的形式存在,且γ-Al2O3的含量随喷涂功率的增加而增加,而涂层中的Ti02则以金红石型存在;其微结构为完全熔化区的片状微观组织和部分熔化区的纳米级颗粒共存的组织;等离子喷涂功率和TiO2含量对涂层的硬度和耐磨性能均有显著的影响。
引用
收藏
页码:145 / 150
页数:6
相关论文
共 9 条
[1]   激光表面重熔对ZrO2-8wt%Y2O3热障涂层组织与抗热震性能的影响 [J].
王超 ;
宋仁国 .
材料热处理学报, 2011, 32 (05) :143-146
[2]   等离子喷涂纳米团聚体粉末的熔化特性研究 [J].
宫文彪 ;
孙大千 ;
孙喜兵 ;
刘威 .
材料热处理学报, 2007, (04) :125-129
[3]  
纳米表面工程[M]. 化学工业出版社 , 徐滨士主编, 2004
[4]  
Microstructure and mechanical properties of Al 2 O 3 –Cr 2 O 3 composite coatings produced by atmospheric plasma spraying[J] . Kai Yang,Xiaming Zhou,Huayu Zhao,Shunyan Tao.Surface & Coatings Technology . 2011 (6)
[5]   Structure and mechanical properties of plasma sprayed coatings of titania and alumina [J].
Ctibor, Pavel ;
Bohac, Petr ;
Stranyanek, Martin ;
Ctvrtlik, Radim .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (16) :3509-3514
[6]  
Hydrogen permeation resistance of plasma-sprayed Al 2 O 3 and Al 2 O 3 –13wt.% TiO 2 ceramic coatings on austenitic stainless steel[J] . R.G Song.Surface & Coatings Technology . 2003 (2)
[7]  
Microstructure development of Al 2 O 3 –13wt.%TiO 2 plasma sprayed coatings derived from nanocrystalline powders[J] . D. Goberman,Y.H. Sohn,L. Shaw,E. Jordan,M. Gell.Acta Materialia . 2002 (5)
[8]  
Catalytic behavior of plasma-sprayed Al–Al 2 O 3 coatings doped with metal oxides[J] . L.L. Pranevicius,P. Valatkevicius,V. Valincius,C. Montassier.Surface & Coatings Technology . 2000 (1)
[9]  
Microstructural characteristics and formation mechanism of Al2O3-13wt.%TiO2coatings plasma-sprayed with nanostructured agglomerated powders. Wang D S,Tian Z J,Shen L D,et al. Surface and Coatings Technology . 2009