基于ARM功率谱分析的喷动流化床压力波动频率特性

被引:9
作者
钟文琪
章名耀
机构
[1] 东南大学洁净煤发电及燃烧技术教育部重点实验室
[2] 东南大学洁净煤发电及燃烧技术教育部重点实验室 南京
[3] 南京
关键词
流态化; 喷动流化床; 压力波动; 频率特性; ARM功率谱;
D O I
暂无
中图分类号
TQ051.1 [流体力学过程用机械与设备];
学科分类号
080706 ;
摘要
在 30 0mm× 30mm× 2 0 0 0mm的喷动流化床煤部分气化试验装置上 ,采用现代自回归模型 (ARM)功率谱分析的方法 ,系统地考察了喷动气流速、流化气流率、静止床层高度对喷动流化床床层不同位置压力波动主频的影响 .结果表明 :床层不同位置压力波动的主频随喷动气流速的增大而增大 ,随静止床高的增大而减小 ;V型布风板以上床层压力波动主频随流化气流率的增大先增大 (Qf/Qmf≤ 1 .0 )后减小 (Qf/Qmf>1 .0 ) ,布风板区域内压力波动主频随流化气流率的增大而增大 .结合数码CCD图像对结果进行分析 ,揭示了压力波动主频与床内流动结构的关系 ,这对于发展喷动流化床技术提供了新的研究方法
引用
收藏
页码:446 / 450
页数:5
相关论文
共 12 条
[1]  
Flow pattern transition in a large jetting fluidized bed with a vertical nozzle. Guo Q J,Yue G X,Zhang J Y. Industrial and Engineering Chemistry . 2001
[2]  
Voidage and particle ve locity profiles in a spout-fluid bed. Pianarosa D L,Freitas L,Lim C J,et al. The Canadian Journal of Chemical Engineering . 2000
[3]  
Separation and residence times of lager particles in a spout-fluid bed. Waldie B. The Canadian Journal of Chemical Engineering . 1992
[4]  
Hydrodynamic behavior of a tw o-dimension jetting fluidized bed with binary mixtures. Guo Q J,Yue G X,Zhang J Y. Chemical Engineering Science . 2001
[5]  
Akaike s information criterion and recent deve lopments in information complexity. Hamparsum B. Journal of Mathematical . 2000
[6]  
Hydrodynamics of spouted and spout-flu idized beds at high temperature. Ye B,Lim C J,Grace J R. The Canadian Journal of Chemical Engineering . 1992
[7]  
Evaluation of the jet penetrat ion depth in gas-fluidized beds by pressure signals analysis. Vaccaro S,Musmarra D,Petrecca M. International Journal of Multiphase Flow . 1997
[8]  
Propagation of pressure waves and for ced oscillation of fluidized beds and their effects on measurements of local hydrodynamics. Bi H T,Grace J R,Zhu J X. Powder Technology . 1995
[9]  
Numerical simulation of pressurized spouted fluidized bed for coal semi-gasification. Zhou S M,Jin B S,Zhang M Y. Journal of South . 2002
[10]  
The British coal spout-fluid bed gasification process. Arnold S J,Laughlin M K. The Canadian Journal of Chem ical Engineering . 1992