槽式太阳能集热管传热损失性能的数值研究

被引:20
作者
熊亚选
吴玉庭
马重芳
Modibo Kane TRAORE
张业强
机构
[1] 北京工业大学传热强化与过程节能教育部重点实验室暨传热与能源利用北京市重点实验室
基金
国家自然科学基金重点项目; 北京市自然科学基金;
关键词
槽式太阳能集热管; 二维经验模型; 热性能; 环形空间压力; 选择性涂层; 环境风速;
D O I
暂无
中图分类号
TK515 [太阳能加热装置];
学科分类号
摘要
通过分析槽式太阳能集热管热损失的计算方法和传热过程,建立了槽式太阳能集热管传热损失性能计算分析的二维稳态经验模型,模型的计算结果与试验数据基本一致,验证了模型的有效性.利用该二维稳态经验模型系统地研究了环境风速、温差、选择性涂层和环形空间气体压力对两种商业化槽式太阳能集热管传热损失性能的影响,并进行了对比分析.结果表明:选择性涂层的性能和环形空间气体压力是影响集热管热损失的两个主要因素,也是保持集热管热性能的关键;环境风速对集热管热损失影响相对较小,而工作温差对集热管热损失的影响较大;新一代集热管在热性能上有了很大提高.
引用
收藏
页码:263 / 271
页数:9
相关论文
共 10 条
[1]   抛物跟踪式太阳高温集热器的研究 [J].
王志峰 .
太阳能学报, 2000, (01) :69-76
[2]  
In-Plane Stability of Parabolic Arches with Horizontal Spring Supports. I: Theory[J] . Mark Andrew Bradford,Tao Wang,Yong-Lin Pi,R. Ian Gilbert.Journal of Structural Engineering . 2007 (8)
[3]  
In-Plane Stability of Parabolic Arches with Horizontal Spring Supports. II: Experiments[J] . Tao Wang,Mark Andrew Bradford,R. Ian Gilbert,Yong-Lin Pi.Journal of Structural Engineering . 2007 (8)
[4]   In-plane elastic buckling of pin-ended shallow parabolic arches [J].
Moon, Jiho ;
Yoon, Ki-Yong ;
Lee, Tae-Hyung ;
Lee, Hak-Eun .
ENGINEERING STRUCTURES, 2007, 29 (10) :2611-2617
[5]   In-plane elastic stability of arches under a central concentrated load [J].
Bradford, MA ;
Uy, B ;
Pi, Y .
JOURNAL OF ENGINEERING MECHANICS-ASCE, 2002, 128 (07) :710-719
[6]   Non-linear buckling and postbuckling of elastic arches [J].
Pi, YL ;
Trahair, NS .
ENGINEERING STRUCTURES, 1998, 20 (07) :571-579
[7]  
Modelling, optimisation and performance evaluation of a parabolic trough solar collector steam generation system[J] . Soteris Kalogirou,Stephen Lloyd,John Ward.Solar Energy . 1997 (1)
[8]  
Nonlinear Curved‐Beam Element for Arch Structures[J] . Robert K. Wen,Bambang Suhendro.Journal of Structural Engineering . 1991 (11)
[9]  
General Equations for Buckling of Thin, Shallow Arches of Any Shape[J] . P. J. Wicks.Journal of Engineering Mechanics . 1991 (2)
[10]   BUCKLING OF SHALLOW ARCHES WITH SUPPORTS THAT STIFFEN WHEN COMPRESSED [J].
PLAUT, RH .
JOURNAL OF ENGINEERING MECHANICS-ASCE, 1990, 116 (04) :973-976