Unified cutting force model for turning, boring, drilling and milling operations

被引：150

作者：

Kaymakci, M. ^{[1
]}

Kilic, Z. M. ^{[1
]}

Altintas, Y. ^{[1
]}

机构：

[1] Univ British Columbia, Dept Mech Engn, Mfg Automat Lab, Vancouver, BC V6T 1Z4, Canada

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2012年 / 54-55卷

基金：

加拿大自然科学与工程研究理事会;

关键词：

Mechanics; Drilling; Turning; Milling; Boring; END MILLS; PART II; MECHANICS; DYNAMICS; PERFORMANCE; PREDICTION; CUTTERS;

D O I：

10.1016/j.ijmachtools.2011.12.008

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A unified cutting mechanics model is developed for the prediction of cutting forces in milling, boring, turning and drilling operations with inserted tools. The insert and its orientation on a reference tool body are mathematically modeled by following ISO tool definition standards. The material and cutting edge geometry-dependent friction and normal forces acting on the rake face are transformed into reference tool coordinates using a general transformation matrix. The forces are further transformed into turning, boring, drilling and milling coordinates by simply assigning operation specific parameters. The unified model is validated in cutting experiments. (C) 2011 Elsevier Ltd. All rights reserved.

引用

页码：34 / 45

页数：12

共 20 条

[1] Modelling and simulation of micro-milling cutting forces [J].

Afazov, S. M. ;

Ratchev, S. M. ;

Segal, J. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2010, 210 (15) :2154-2162

[2] Modeling approaches and software for predicting the performance of milling operations at MAL-UBC [J].

Altintas, Y .

MACHINING SCIENCE AND TECHNOLOGY, 2000, 4 (03) :445-478

[3]

Altintas Y., 2011, ANN CIRP, V60

[4]

[Anonymous], 1982, 3002 ISO

[5]

[Anonymous], 2006, 13399 ISO 1

[6]

[Anonymous], 2000, MANUFACTURING AUTOMA, DOI DOI 10.1017/CBO9780511843723

[7]

[Anonymous], 2006, Mechanics and dynamics of drilling

[8] The unified-generalized mechanics of cutting approach - A step towards a house of predictive performance models for machining operations [J].

Armarego, EJA .

MACHINING SCIENCE AND TECHNOLOGY, 2000, 4 (03) :319-362

[9] Mechanics of boring processes - Part I [J].

Atabey, F ;

Lazoglu, I ;

Altintas, Y .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (05) :463-476

[10]

Atabey F, 2003, INT J MACH TOOL MANU, V43, P477, DOI 10.1016/S0890-6955(02)00277-8

← 1 2 →