Tribological behavior of polyetheretherketone, a thermotropic liquid crystalline polymer and in situ composites based on their blends under dry sliding conditions at elevated temperatures

被引：29

作者：

Hanchi, J ^{[1
]}

Eiss, NS ^{[1
]}

机构：

[1] VIRGINIA POLYTECH INST & STATE UNIV,DEPT MECH ENGN,BLACKSBURG,VA 24061

来源：

WEAR | 1996年 / 200卷 / 1-2期

关键词：

in situ composites; poly(ether-ether-ketone); unlubricated sliding; high temperature;

D O I：

10.1016/S0043-1648(96)07282-1

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The elevated temperature dry sliding friction and wear behavior of injection molded polyetheretherketone (PEEK), a thermotropic liquid crystalline polymer (TLCP), and in situ composites based on PEEK-TLCP blends were investigated. Results from sliding tests conducted on a pin-on-disk tribometer at selected temperatures within the range from 20 to 250 degrees C are reported. Friction and wear mechanisms are related to the microstructure and phase behavior of the material systems investigated. TLCP concentration and thermally activated molecular relaxation processes are related to the mechanical properties and tribological performance of the PEEK-HX 1000 blends. The potential of TLCP in situ reinforcement as a route towards the development of performance thermoplastic-based tribomaterials for high temperature use is discussed.

引用

页码：105 / 121

页数：17

共 40 条

[1]

Alexander L.E., 1969, XRAY DIFFRACTION MET

[2]

ALFREY T, 1978, MOL BASIS TRANSITION, P193

[3] EFFECT OF ANNEALING ON THE PROPERTIES OF POLY(ETHER ETHER KETONE) [J].

ARZAK, A ;

EGUIAZABAL, JI ;

NAZABAL, J .

POLYMER ENGINEERING AND SCIENCE, 1991, 31 (08) :586-591

[4] THE ROLE OF PARTIAL MISCIBILITY ON THE PROPERTIES OF BLENDS OF A POLYETHERIMIDE AND 2 LIQUID-CRYSTALLINE POLYMERS [J].

BAFNA, SS ;

SUN, T ;

BAIRD, DG .

POLYMER, 1993, 34 (04) :708-715

[5]

BELYI VA, 1982, FRICTION WEAR POLYM

[6] THE MORPHOLOGY OF POLY(ARYL-ETHER-ETHER-KETONE) [J].

BLUNDELL, DJ ;

OSBORN, BN .

POLYMER, 1983, 24 (08) :953-958

[7]

BOYER R, 1975, POLYM MATERIALS, P277

[8]

Brown N., 1986, FAILURE PLASTICS, P98

[9] A BASIC STUDY OF ORIENTATION IN POLY(ETHYLENE-TEREPHTHALATE) STRETCH-BLOW MOLDED BOTTLES [J].

CAKMAK, M ;

SPRUIELL, JE ;

WHITE, JL .

POLYMER ENGINEERING AND SCIENCE, 1984, 24 (18) :1390-1395

[10] THE APPLICATION OF LIQUID-CRYSTAL POLYMER PROPERTIES [J].

COX, MK .

MOLECULAR CRYSTALS AND LIQUID CRYSTALS, 1987, 153 :415-422

← 1 2 3 4 →