Tensile Strength of Joints Bonded With a Nano-particle-Reinforced Adhesive

被引：34

作者：

Park, Sang Wook ^{[1
]}

Kim, Byung Chul ^{[1
]}

Lee, Dai Gil ^{[1
]}

机构：

[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Taejon 305701, South Korea

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2009年 / 23卷 / 01期

关键词：

Double lap joint; carbon black; nano-particles; particle-reinforced adhesive; COMPOSITES; TOUGHNESS; GRAPHITE;

D O I：

10.1163/156856108X344063

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In order to improve the tensile lap shear strength of adhesively bonded joints, nano-particles were dispersed in the adhesive using a 3-roll mill. The dispersion states of nano-particles in the epoxy adhesive were observed with TEM (Transmission Electron Microscopy) with respect to the mixing conditions, and the effect of nano-particles on the mechanical properties of the adhesive was measured with respect to dispersion state and weight content of nano-particles. Also the static tensile load capability of the adhesively bonded double lap joints composed of uni-directional glass/epoxy composite and nano-particle- reinforced epoxy adhesive was investigated to assess the effect of nano-particles on the lap shear strength of the joint.

引用

页码：95 / 113

页数：19

共 12 条

[1]

CHOI JH, 1996, J ADHESION, V44, P197

[2]

Hart-Smith L.J., 1987, ENGINEERED MAT HDB C, V1, P479

[3] Performance of expanded graphite and expanded milled-graphite fillers in thermosetting resins [J].

Jia, W ;

Tchoudakov, R ;

Narkis, M ;

Siegmann, A .

POLYMER COMPOSITES, 2005, 26 (04) :526-533

[4] Toughening mechanisms of nanoparticle-modified epoxy polymers [J].

Johnsen, B. B. ;

Kinloch, A. J. ;

Mohammed, R. D. ;

Taylor, A. C. ;

Sprenger, S. .

POLYMER, 2007, 48 (02) :530-541

[5] Investigation of optimal surface treatments for carbon/epoxy composite adhesive joints [J].

Kim, JK ;

Kim, HS ;

Lee, DG .

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2003, 17 (03) :329-352

[6] Thermal characteristics of tubular single lap adhesive joints under axial loads [J].

Kim, JK ;

Lee, DG .

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2001, 15 (12) :1511-1528

[7]

Lee DG, 2006, AXIOMATIC DESIGN FAB, P14

[8] ]Hybrid electro-conductive composites with improved toughness, filled by carbon black [J].

Novák, I ;

Krupa, I ;

Janigová, I .

CARBON, 2005, 43 (04) :841-848

[9] Selective use of rubber toughening to optimize lap-joint strength [J].

Sancaktar, E ;

Kumar, S .

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2000, 14 (10) :1265-1296

[10] Comparison of analytical, numerical, and experimental methods in deriving fracture toughness properties of adhesives using bonded double lap joint specimens [J].

Setoodeh, AR ;

Hadavinia, H ;

Biglari, FR ;

Nikbin, K .

JOURNAL OF ADHESION, 2005, 81 (05) :529-553

← 1 2 →