Effect of loading rate on the serrated flow of a bulk metallic glass during nanoindentation

被引：59

作者：

Burgess, T. ^{[1
]}

Laws, K. J. ^{[1
]}

Ferry, M. ^{[1
]}

机构：

[1] Univ New S Wales, Sch Mat Sci & Engn, Sydney, NSW 2052, Australia

来源：

ACTA MATERIALIA | 2008年 / 56卷 / 17期

关键词：

Nanoindentation; Magnesium alloys; Plastic deformation; Metallic glasses;

D O I：

10.1016/j.actamat.2008.05.039

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The nature of displacement burst features throughout the load-controlled instrumented indentation of a Mg65Cu25Y10 bulk metallic glass was investigated over four decades of loading rate with varying peak loads and tip geometry. Where observed in the load-displacement data, displacement burst frequency, size and duration were found to be inversely related to loading rate, despite hardness and stiffness being independent of this parameter. Based on this evidence, it is proposed that increasing the loading rate during nanoindentation does not change the mechanism of deformation front serrated flow via shear banding to smooth plastic flow but is a result of the inability to resolve the length of displacement bursts at high loading rates. A displacement burst model is proposed that was found to successfully fit the experimental data for the investigated range of loading rates. (c) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

引用

页码：4829 / 4835

页数：7

共 45 条

[1] PLASTIC-DEFORMATION IN METALLIC GLASSES [J].

ARGON, AS .

ACTA METALLURGICA, 1979, 27 (01) :47-58

[2] Metallic glasses as structural materials [J].

Ashby, MF ;

Greer, AL .

SCRIPTA MATERIALIA, 2006, 54 (03) :321-326

[3] Free volume model: High-temperature deformation of a Zr-based bulk metallic glass [J].

Bletry, M ;

Guyot, P ;

Blandin, JJ ;

Soubeyroux, JL .

ACTA MATERIALIA, 2006, 54 (05) :1257-1263

[4] Plastic deformation and mechanical softening of Pd40Cu30Ni10P20 bulk metallic glass during nanoindentation [J].

Concustell, A ;

Sort, J ;

Alcalá, G ;

Mato, S ;

Gebert, A ;

Eckert, J ;

Baró, MD .

JOURNAL OF MATERIALS RESEARCH, 2005, 20 (10) :2719-2725

[5] Nanoindentation studies of Zr-based bulk metallic glasses [J].

Drozdz, D. ;

Kulik, T. ;

Fecht, H. J. .

JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 441 (1-2) :62-65

[6] Serrated plastic flow during nanoindentation of a bulk metallic glass [J].

Golovin, YI ;

Ivolgin, VI ;

Khonik, VA ;

Kitagawa, K ;

Tyurin, AI .

SCRIPTA MATERIALIA, 2001, 45 (08) :947-952

[7] Nanoindentation studies of shear banding in fully amorphous and partially devitrified metallic alloys [J].

Greer, AL ;

Castellero, A ;

Madge, SV ;

Walker, IT ;

Wilde, JR .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 :1182-1185

[8] Static and dynamic crystallization in Mg-Cu-Y bulk metallic glass [J].

Gun, B. ;

Laws, K. J. ;

Ferry, M. .

JOURNAL OF NON-CRYSTALLINE SOLIDS, 2006, 352 (36-37) :3887-3895

[9] Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions [J].

Hays, CC ;

Kim, CP ;

Johnson, WL .

PHYSICAL REVIEW LETTERS, 2000, 84 (13) :2901-2904

[10] Formation, microstructure and properties of long-period order structure reinforced Mg-based bulk metallic glass composites [J].

Hui, X. ;

Dong, W. ;

Chen, G. L. ;

Yao, K. F. .

ACTA MATERIALIA, 2007, 55 (03) :907-920

← 1 2 3 4 5 →