Effects of cell size on compressive properties of aluminum foam

被引：64

作者：

Cao, XQ ^{[1
]}

Wang, ZH

Ma, HW

Zhao, LM

Yang, GT

机构：

[1] Taiyuan Univ Technol, Coll Mat Sci & Engn, Taiyuan 030024, Peoples R China

[2] Taiyuan Univ Technol, Inst Appl Mech, Taiyuan 030024, Peoples R China

来源：

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2006年 / 16卷 / 02期

基金：

中国国家自然科学基金;

关键词：

aluminum foam; infiltrating process; cell size; compressive properties; strain rate sensitivity;

D O I：

10.1016/S1003-6326(06)60060-5

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The effects of cell size on the quasi-static and dynamic compressive properties of open cell aluminum foams produced by infiltrating process were studied experimentally. The quasi-static and dynamic compressive tests were carried out on MTS 810 system and SHPB(split Hopkinson pressure bar) respectively. It is found that the elastic moduli and compressive strengths of the studied aluminum foam are not only dependent on the relative density but also dependent on the cell size of the foam under both quasi-static loading and dynamic loading. The foams studied show a significant strain rate sensitivity, the flow strength can be improved as much as 112%, and the cell size also has a sound influence on the strain rate sensitivity of the foams. The foams of middle cell size exhibit the highest elastic modulus, the highest flow strength and the most significant strain rate sensitivity.

引用

页码：351 / 356

页数：6

共 16 条

[1] Size effects in ductile cellular solids. Part II: experimental results [J].

Andrews, EW ;

Gioux, G ;

Onck, P ;

Gibson, LJ .

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (03) :701-713

[2]

[Anonymous], 1997, CELLULAR SOLID STRUC

[3] Manufacture, characterisation and application of cellular metals and metal foams [J].

Banhart, J .

PROGRESS IN MATERIALS SCIENCE, 2001, 46 (06) :559-U3

[4] Deformation characteristics of metal foams [J].

Banhart, J ;

Baumeister, J .

JOURNAL OF MATERIALS SCIENCE, 1998, 33 (06) :1431-1440

[5] Aluminium foams for transport industry [J].

Baumeister, J ;

Banhart, J ;

Weber, M .

MATERIALS & DESIGN, 1997, 18 (4-6) :217-220

[6]

CHEN Huazhi, 2003, HOT WORKING TECHNOLO, P1

[7]

[程和法 Cheng Hefa], 2003, [有色金属, Nonferrous metals], V55, P10

[8] Properties of heat-treated aluminium foams [J].

Lehmhus, D ;

Banhart, J .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 349 (1-2) :98-110

[9] Effect of dual-size cell mix on the stiffness and strength of open-cell aluminum foams [J].

Li, JR ;

Cheng, HF ;

Yu, JL ;

Han, FS .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 362 (1-2) :240-248

[10] The effect of cell wall microstructure on the deformation and fracture of aluminium-based foams [J].

Markaki, AE ;

Clyne, TW .

ACTA MATERIALIA, 2001, 49 (09) :1677-1686

← 1 2 →