Light-emitting electrochemical cells using a molten delocalized salt

被引：62

作者：

Panozzo, S

Armand, M

Stéphan, O

机构：

[1] Univ Grenoble 1, Spectrometrie Phys Lab, F-38042 St Martin Dheres, France

[2] Univ Grenoble 1, CNRS, UMR C5588, F-38042 St Martin Dheres, France

来源：

APPLIED PHYSICS LETTERS | 2002年 / 80卷 / 04期

关键词：

D O I：

10.1063/1.1436534

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

The device performances of light-emitting electrochemical cells are improved by adding a room-temperature molten salt (tetrahexylammonium-bis-trifluoro-methyl-sulfonyl imide) directly into the light-emitting layer. For poly(9,9-dihexyl-fluorene-2,7-diyl) with an indium-tin-oxide anode and an aluminum cathode, the power efficiency can be increased by more than one order of magnitude. An even more pronounced effect is observed for poly [2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylenevinylene]. Equally important for both luminescent polymers, the operating voltage is drastically reduced. (C) 2002 American Institute of Physics.

引用

收藏

页码：679 / 681

页数：3

相关论文

共 14 条

[1] Hydrophobic, highly conductive ambient-temperature molten salts [J].

Bonhote, P ;

Dias, AP ;

Papageorgiou, N ;

Kalyanasundaram, K ;

Gratzel, M .

INORGANIC CHEMISTRY, 1996, 35 (05) :1168-1178

[2] Light-emitting electrochemical cells with crown ether as solid electrolyte [J].

Cao, Y ;

Pei, QB ;

Andersson, MR ;

Yu, G ;

Heeger, AJ .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (12) :L317-L320

[3] Stabilization of the conductivity of poly(3-methylthiophene) by triflimide anions [J].

Djellab, H ;

Armand, M ;

Delabouglise, D .

SYNTHETIC METALS, 1995, 74 (03) :223-226

[4] Light-emitting electrochemical cells from oligo(ethylene oxide)-substituted polythiophenes:: Evidence for in situ doping [J].

Johansson, T ;

Mammo, W ;

Andersson, MR ;

Inganäs, O .

CHEMISTRY OF MATERIALS, 1999, 11 (11) :3133-3139

[5] Organic light-emitting electrochemical cells based on polyfluorene -: Investigation of the failure modes [J].

Kervella, Y ;

Armand, M ;

Stéphan, O .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2001, 148 (11) :H155-H160

[6] PHASE-DIAGRAMS AND CONDUCTIVITY BEHAVIOR OF POLY(ETHYLENE OXIDE) MOLTEN-SALT RUBBERY ELECTROLYTES [J].

LASCAUD, S ;

PERRIER, M ;

VALLEE, A ;

BESNER, S ;

PRUDHOMME, J ;

ARMAND, M .

MACROMOLECULES, 1994, 27 (25) :7469-7477

[7] Polymer light-emitting electrochemical cells: In situ formation of a light-emitting p-n junction [J].

Pei, QB ;

Yang, Y ;

Yu, G ;

Zhang, C ;

Heeger, AJ .

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY, 1996, 118 (16) :3922-3929

[8] Degradation and failure of MEH-PPV light-emitting diodes [J].

Scott, JC ;

Kaufman, JH ;

Brock, PJ ;

DiPietro, R ;

Salem, J ;

Goitia, JA .

JOURNAL OF APPLIED PHYSICS, 1996, 79 (05) :2745-2751

[9] Failure modes in polymer-based light-emitting diodes [J].

Sheats, JR ;

Roitman, DB .

SYNTHETIC METALS, 1998, 95 (02) :79-85

[10] Blue-green light-emitting diodes and electrochemical cells based on a copolymer derived from fluorene [J].

Stéphan, O ;

Collomb, V ;

Vial, JC ;

Armand, M .

SYNTHETIC METALS, 2000, 113 (03) :257-262