Ultrafine ferrite in low carbon steel

被引：240

作者：

Hodgson, PD ^{[1
]}

Hickson, MR

Gibbs, RK

机构：

[1] Deakin Univ, Sch Engn & Technol, Geelong, Vic, Australia

[2] Melbourne Labs, BHP Res, Mulgrave, Australia

[3] BHP Steel, Hastings On Hudson, NY USA

来源：

SCRIPTA MATERIALIA | 1999年 / 40卷 / 10期

关键词：

D O I：

10.1016/S1359-6462(98)00411-4

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Ultrafine (1μm) equiaxed ferrite grains in steel strip were produced using a simple new thermomechanical process. Strips were reheated to produce a coarse austenite grain size, then rolled in a single pass at or just above the Ar3. The ultrafine grains formed in the surface regions of the strip. Coarser ferrite grains (5-10μm) and carbides were produced in the core of the strip. Refinement of the grains was attributed to strain induced transformation from austenite to ferrite.

引用

页码：1179 / 1184

页数：6

共 15 条

[1]

Beynon J. H., 1992, Materials Forum, V16, P37

[2]

GIBBS RK, 1991, MORR E FIN S, P73

[3]

GOHDA S, 1981, T ISIJ, V21, P7

[4] A MATHEMATICAL-MODEL TO PREDICT THE MECHANICAL-PROPERTIES OF HOT ROLLED C-MN AND MICROALLOYED STEELS [J].

HODGSON, PD ;

GIBBS, RK .

ISIJ INTERNATIONAL, 1992, 32 (12) :1329-1338

[5]

HODGSON PD, 1998, MICROALLOYING STEELS

[6]

JONAS JJ, 1990, RECRYSTALLIZATION 90, P27

[7] HOT DUCTILITY OF STEELS AND ITS RELATIONSHIP TO THE PROBLEM OF TRANSVERSE CRACKING DURING CONTINUOUS-CASTING [J].

MINTZ, B ;

YUE, S ;

JONAS, JJ .

INTERNATIONAL MATERIALS REVIEWS, 1991, 36 (05) :187-217

[8]

Morrison W. B., 1970, ULTRAFINE GRAIN META, P183

[9]

Najafizadeh A, 1993, MATER SCI FORUM, V113-115, P441

[10]

PRIESTNER R, 1992, MATER SCI TECH SER, V8, P849, DOI 10.1179/026708392790169786

← 1 2 →