Coatings produced by electrophoretic deposition from nano-particulate silica sol-gel suspensions

被引：67

作者：

Castro, Y ^{[1
]}

Ferrari, B ^{[1
]}

Moreno, R ^{[1
]}

Durán, A ^{[1
]}

机构：

[1] CSIC, Inst Ceram & Vidrio, Madrid 28049, Spain

来源：

SURFACE & COATINGS TECHNOLOGY | 2004年 / 182卷 / 2-3期

关键词：

sol-gel/slurry; nanoparticles; electrophoretic deposition; immersion test;

D O I：

10.1016/j.surfcoat.2003.07.001

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Sol-gel technology allows the production of hybrid coatings on metals using low temperatures for densification, but has an important limitation related with the maximum coating thickness attainable, typically lower than 2 mum. The incorporation of nano-particles to the sol can make it possible to increase the coating thickness, without increasing the sintering temperature. This work deals with the preparation of thick sol-gel coating by electrophoretic deposition (EPD). Commercial SiO2 nanoparticles are suspended in an acid-catalysed SiO2 sol, whose stability is largely increased by adding tetramethylammonium hydroxide (TMAH) up to pH 6. Coatings are formed by dipping and by EPD on AISI 304 stainless steel substrates. The protective behaviour against corrosion in aggressive media (i.e. marine water) of the produced films is studied. EPD leads to coatings as thick as 5 mum with Pod corrosion resistance, while the suspension stability is increased by 15 times compared with that of the starting acid suspension. (C) 2003 Elsevier Science B.V. All rights reserved.

引用

页码：199 / 203

页数：5

共 14 条

[1]

*ASTM, G5991 ASTM, P216

[2]

CANON WR, 1989, ADV CERAMICS CERAMIC, V26, P525

[3]

Castro Y, 2002, ADV MATER, V14, P505, DOI 10.1002/1521-4095(20020404)14:7<505::AID-ADMA505>3.3.CO

[4]

2-W

[5] BEHAVIOR IN HOT AMMONIA ATMOSPHERE OF SIO2-COATED STAINLESS-STEELS PRODUCED BY A SOL-GEL PROCEDURE [J].

DESANCTIS, O ;

GOMEZ, L ;

PELLEGRI, N ;

DURAN, A .

SURFACE & COATINGS TECHNOLOGY, 1995, 70 (2-3) :251-255

[6] Bioactive sol-gel coatings for orthopaedic prosthesis [J].

Gallardo, J ;

Galliano, P ;

Moreno, R ;

Durán, A .

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 2000, 19 (1-3) :107-111

[7] Sol-gel coatings on 316L steel for clinical applications [J].

Galliano, P ;

De Damborenea, JJ ;

Pascual, MJ ;

Durán, A .

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 1998, 13 (1-3) :723-727

[8] Sol-gel coatings on metals [J].

Guglielmi, M .

JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY, 1997, 8 (1-3) :443-449

[9]

GUGLIELMI M, 1994, CERAM ACTA, V2, P19

[10]

GUGLIELMI M, 1994, CERAM ACTA, V3, P19

← 1 2 →