A high intensity dc H- source for low energy injection

被引:13
作者
Kuo, T
Baartman, R
Dutto, G
Hahto, S
Arje, J
Liukkonen, E
机构
[1] TRIUMF, Vancouver, BC V6T 2A3, Canada
[2] Univ Jyvaskyla, SF-40351 Jyvaskyla, Finland
关键词
D O I
10.1063/1.1430520
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
While a 20 mA dc H- source system at 25-30 keV beam energy has been developed at TRIUMF several years ago, another recent demand on the system is to provide a 4 to 5 mA H- at the 4-6 keV energy range. We found that at this low energy range, the existing source/extraction system can only give similar to1 mA with poor emittance due to strong space-charge effect. Fortunately, a very special source/extraction mechanism together with the use of neutralization was discovered and developed to overcome this difficulty. Up to 4 mA with a normalized rms emittance of 0.15 pi mm mr has been achieved at 6 keV. This performance finds its usefulness for injection systems where lower beam energy and higher beam intensity are required. A copy of the TRIUMF system was constructed and successfully tested in the summer of 2000 for the "H- Acceleration Project" for the K130 cyclotron at Jyvaskyla University, Finland. (C) 2002 American Institute of Physics.
引用
收藏
页码:986 / 988
页数:3
相关论文
共 4 条
[1]  
BAARTMAN R, UNPUB P 1998 EPAC, P949
[2]  
HEIKKINEN P, 2001, IN PRESS P 16 ICC
[3]  
HOLMES AJT, 1989, PHYSICS TECHNOLOGY I
[4]   On the development of a 15 mA direct current H- multicusp source [J].
Kuo, T ;
Yuan, D ;
Jayamanna, K ;
McDonald, M ;
Baartman, R ;
Schmor, P ;
Dutto, G .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1996, 67 (03) :1314-1316