The influence of the slip flow on steady-state load capacity, stiffness and damping coefficients of elastically supported gas foil bearings

被引:23
作者
Lee, NS [1 ]
Choi, DH
Lee, YB
Kim, TH
Kim, CH
机构
[1] Hanyang Univ, Dept Mech Design & Prod Engn, Seoul 133791, South Korea
[2] Korea Inst Sci & Technol, Tribol Res Ctr, Seoul 136791, South Korea
关键词
foil air bearings; slip flow; load-carrying capacity; gas bearings;
D O I
10.1080/10402000208982577
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The slip flow effect is considered to estimate the load capacity and the dynamic coefficients of an elastically-supported gas foil bearing when the local Knudsen number for the minimum film thickness is greater than 0.01. The compressible Reynolds equation with slip flow conditions is used to evaluate the loud capacity. The linearized dynamic coefficient equations are obtained by the perturbation methods Numerical predictions compare the static, and dynamic force performances considering slip flow at room-to-high temperate with the of elastically-supported foil bearing without slip flow for a range of hearing compliances and bearing numbers. It has been shown that the slip flow effect on the load capacity and the dynamic at high temperature is significant in the region of low bearing numbers.
引用
收藏
页码:478 / 484
页数:7
相关论文
共 14 条
[1]  
DellaCorte C., 1997, TM107405 NASA
[2]  
DELLACORTE C, 2000, P ASME STLE TRIB C S
[3]   A DATABASE FOR INTERPOLATION OF POISEUILLE FLOW-RATES FOR HIGH KNUDSEN NUMBER LUBRICATION PROBLEMS [J].
FUKUI, S ;
KANEKO, R .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1990, 112 (01) :78-83
[4]  
Gad-el-Hak M., 2002, The MEMS Handbook, V2
[5]   ANALYSIS OF GAS-LUBRICATED FOIL JOURNAL BEARINGS [J].
HESHMAT, H ;
WALOWIT, JA ;
PINKUS, O .
JOURNAL OF LUBRICATION TECHNOLOGY-TRANSACTIONS OF THE ASME, 1983, 105 (04) :647-655
[6]  
Howard S. A., 1999, NASACR1999208689
[7]  
HOWARD SA, 2001, P STLE ASME TRIB C S
[8]   NUMERICAL-ANALYSIS OF REYNOLDS-EQUATION FOR GAS LUBRICATION IN A HIGH LAMBDA-REGION [J].
KAWABATA, N .
JSME INTERNATIONAL JOURNAL, 1987, 30 (263) :836-842
[9]  
MITSUYA Y, 1987, ASME, V109, P276
[10]   Finite element approach to the prediction of foil bearing rotor dynamic coefficients [J].
Peng, JP ;
Carpino, M .
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1997, 119 (01) :85-90