Perfluorocarbon emissions from electrolytic reduction of rare earth metals in fluoride/oxide system

Perfluorocarbons (PFC) are important greenhouse gas. In the aluminum electrolysis industry, PFC emission had been valued. The electrolytic reduction of rare earth metals in fluoride/oxide system with carbon anode and tungsten cathode also has PFC emission. But the PFC emission in rare earth metals industry received less attention. The PFC emissions during the electrolysis were studied by tracking the change of CF4 concentration in the flue gas of neodymium electrolysis and dysprosium-iron alloy electrolysis. The results showed that there were continuous CF4 overflows in the electrolysis process. The CF4 was outburst when anode effect occurred. The anode effect was always accompanied with the low electrolysis temperature. In addition, because of the electrolytic dysprosium-iron alloy requires higher cell voltage, the PFC emissions are higher than rare earth electrolysis. In general, PFC emissions from rare earth metal electrolysis are quite same as the aluminum electrolysis industry. (C) 2017 Turkish National Committee for Air Pollution Research and Control. Production and hosting by Elsevier B.V. All rights reserved.