Production and properties of amorphous alloy wires in Fe-B base system by a melt extraction method

被引：6

作者：

Katsuya, A ^{[1
]}

Inoue, A ^{[1
]}

Masumoto, T ^{[1
]}

机构：

[1] TOHOKU UNIV,INST MAT RES,SENDAI,MIYAGI 98077,JAPAN

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1997年 / 226卷

关键词：

amorphous alloy wire; good ductility; high mechanical strength; iron-base alloy; large Barkhausen effect; melt extraction method;

D O I：

10.1016/S0921-5093(96)10599-2

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The application of a melt extraction method to Fe-B based alloys was found to cause the formation of continuous amorphous alloy wires with good bending ductility. The wire diameter is in the range of 20-50 mu m for the Fe60B20 and Fe80B14C6 alloys and 20-60 mu m for the Fe80B10P10 alloy. The wires have a nearly real circular cross-section and good mechanical and magnetic properties. The good formability into the wire shape for the Fe-B based alloys without a high degree of shape stability in the molten state allows us to expect that the present process can develop as an alternative method to produce amorphous alloy wires in various alloy systems in which an amorphous wire has not yet been prepared. (C) 1997 Elsevier Science S.A.

引用

页码：104 / 107

页数：4

共 10 条

[1]

HAGIWARA M, 1993, RAPIDLY SOLIDIFIED A, P139

[2] PREPARATION OF AMORPHOUS FE-SI-B AND CO-SI-B ALLOY WIRES BY A MELT EXTRACTION METHOD AND THEIR MECHANICAL AND MAGNETIC-PROPERTIES [J].

INOUE, A ;

KATSUYA, A ;

AMIYA, K ;

MASUMOTO, T .

MATERIALS TRANSACTIONS JIM, 1995, 36 (07) :802-809

[3] MECHANICAL-PROPERTIES AND THERMAL-STABILITY OF TI-BASED AND AL-BASED AMORPHOUS WIRES PREPARED BY A MELT EXTRACTION METHOD [J].

INOUE, A ;

AMIYA, K ;

KATSUYA, A ;

MASUMOTO, T .

MATERIALS TRANSACTIONS JIM, 1995, 36 (07) :858-865

[4]

KATSUYA A, 1996, IN PRESS INT J RAPID, V9

[5]

MARINGER RE, 1974, VAC SCI TECHNOL, V11, P10667

[6]

MASUMOTO T, 1982, P 4 INT C RAP QUENCH, P47

[7] EFFECTS OF METALLOIDS ON MAGNETIC-PROPERTIES OF IRON BASED AMORPHOUS ALLOYS [J].

MITERA, M ;

NAKA, M ;

MASUMOTO, T ;

KAZAMA, N ;

WATANABE, K .

PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1978, 49 (02) :K163-K166

[8]

NAKA M, 1981, SCI REP RES TOHOKU A, V29, P184

[9] PRODUCTION OF METAL FILAMENT BY IN-ROTATING-WATER SPINNING METHOD [J].

OHNAKA, I ;

FUKUSAKO, T ;

OHMICHI, T .

JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1981, 45 (07) :751-758

[10] FINE FIBERS BY MELT EXTRACTION [J].

STROMOLSEN, J .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 178 (1-2) :239-243

← 1 →