Transient Granular Flows in an Inclined Rotating Cylinder: Filling and Emptying

被引:6
作者
Scott, David M. [1 ]
Davidson, John F. [1 ]
Cheah, Sim Ee [1 ]
Chua, Charmaine [1 ]
Gummow, Jeremy G. [1 ]
Lam, Basil P. M. [1 ]
Reder, Iryna [1 ]
机构
[1] Univ Cambridge, Dept Chem Engn, Cambridge CB2 3RA, England
基金
英国工程与自然科学研究理事会;
关键词
ROTARY KILNS; SOLID TRANSPORT; RESIDENCE TIME; BED MOTION; HOLD-UP; PREDICTION;
D O I
10.1021/ie800156r
中图分类号
TQ [化学工业];
学科分类号
081705 [工业催化];
摘要
This paper reports the results of an experimental and theoretical study into transient granular flows in an inclined, slowly rotating cylinder. The granular materials used were sand, poppy seeds, and glass beads. The following situations have been studied: (i) feeding an initially empty cylinder, (ii) emptying a cylinder which is initially in steady state with equal feed and discharge flow rates, and (iii) the motion of a localized pile of granular material through the cylinder. Axial profiles of bed depth and discharge flow rates have been measured. The mechanistic model used here has previously been used to describe the transient response to large step changes in feed rate, rotation speed and angle of inclination; it has no free parameters. There is good agreement between theory and experiment for sand and poppy seeds, but there are discrepancies for glass beads, which under some conditions flow in a different way from sand and poppy seeds.
引用
收藏
页码:159 / 165
页数:7
相关论文
共 14 条
[1]
[Anonymous], 2000, THESIS U CAMBRIDGE U
[2]
Solid transport in a pyrolysis pilot-scale rotary kiln: preliminary results - stationary and dynamic results [J].
Descoins, N ;
Dirion, JL ;
Howes, T .
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION, 2005, 44 (02) :315-321
[3]
EXPERIMENTAL-STUDY OF TRANSVERSE BED MOTION IN ROTARY KILNS [J].
HENEIN, H ;
BRIMACOMBE, JK ;
WATKINSON, AP .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1983, 14 (02) :191-205
[4]
THE PASSAGE OF GRANULAR SOLIDS THROUGH INCLINED ROTARY KILNS [J].
KRAMERS, H ;
CROOCKEWIT, P .
CHEMICAL ENGINEERING SCIENCE, 1952, 1 (06) :259-265
[5]
EXPERIMENTAL-STUDY OF RESIDENCE TIME, PARTICLE MOVEMENT AND BED DEPTH PROFILE IN ROTARY KILNS [J].
LEBAS, E ;
HANROT, F ;
ABLITZER, D ;
HOUZELOT, JL .
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1995, 73 (02) :173-180
[6]
LIM SY, 2002, THESIS U CAMBRIDGE U
[7]
Mean residence time and hold-up of solids in rotary kilns [J].
Liu, Xiao Yan ;
Specht, Eckehard .
CHEMICAL ENGINEERING SCIENCE, 2006, 61 (15) :5176-5181
[8]
ROTARY CYLINDERS - SOLID TRANSPORT PREDICTION BY DIMENSIONAL AND RHEOLOGICAL ANALYSIS [J].
PERRON, J ;
BUI, RT .
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1990, 68 (01) :61-68
[9]
ROTARY FURNACE - DYNAMIC-MODEL OF THE MOTIONS OF A BED [J].
PERRON, J ;
BUI, RT .
CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 1994, 72 (01) :16-25
[10]
SAEMAN WC, 1951, CHEM ENG PROG, V47, P508