Numerical simulation of the ENF test for the mode-II fracture characterization of bonded joints

被引：25

作者：

De Moura, MFSF ^{[1
]}

机构：

[1] Univ Porto, Fac Engn, P-4200465 Oporto, Portugal

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2006年 / 20卷 / 01期

关键词：

bonded joints; mode-II fracture; ENF test; cohesive damage model;

D O I：

10.1163/156856106775212422

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

In this work, the End Notched Flexure (ENF) test is analyzed in order to obtain the critical strain energy release rate in mode-II fracture of bonded joints. A cohesive model based on specially developed interface elements, including a linear softening damage process, is employed. The adequacy of the experimental ENF test is evaluated by numerical simulation. The objective is to compare the critical strain energy release rate in mode-II (G(IIc)) obtained by different data reduction schemes with the real value which is an inputted parameter in the cohesive model. The effect of the Fracture Process Zone (FPZ) ahead of the crack tip is evaluated. A crack equivalent concept is proposed in order to account for the energy dissipated in the FPZ. A data reduction scheme avoiding the need to measure crack length is proposed. A good agreement with the inputted value of G(IIc) was obtained.

引用

页码：37 / 52

页数：16

共 15 条

[1]

Baant ZP., 1998, Fracture and size effect in concrete and other quasibrittle materials, V1st ed.

[2] Concrete fracture models: testing and practice [J].

Bazant, ZP .

ENGINEERING FRACTURE MECHANICS, 2002, 69 (02) :165-205

[3] The use of a cohesive zone model to study the fracture of fibre composites and adhesively-bonded joints [J].

Blackman, BRK ;

Hadavinia, H ;

Kinloch, AJ ;

Williams, JG .

INTERNATIONAL JOURNAL OF FRACTURE, 2003, 119 (01) :25-46

[4] ON THE ANALYSIS AND DESIGN OF THE END NOTCHED FLEXURE (ENF) SPECIMEN FOR MODE-II TESTING [J].

CARLSSON, LA ;

GILLESPIE, JW ;

PIPES, RB .

JOURNAL OF COMPOSITE MATERIALS, 1986, 20 (06) :594-604

[5]

DAVIES P, 1999, PLAST RUB COMPOS PRO, V28, P345

[6] Modeling compression failure after low velocity impact on laminated composites using interface elements [J].

de Moura, MFSF ;

Goncalves, JPM ;

Marques, AT ;

DeCastro, PMST .

JOURNAL OF COMPOSITE MATERIALS, 1997, 31 (15) :1462-1479

[7]

FERNLUND G, 1994, J COMPOS TECH RES, V16, P234, DOI 10.1520/CTR10412J

[8] Interface element including point-to-surface constraints for three-dimensional problems with damage propagation [J].

Gonçalves, JPM ;

de Moura, MFSF ;

de Castro, PMST ;

Marques, AT .

ENGINEERING COMPUTATIONS, 2000, 17 (01) :28-47

[9] Application of interface finite elements to three-dimensional progressive failure analysis of adhesive joints [J].

Gonçalves, JPM ;

de Moura, MFSF ;

Magalhaes, AG ;

de Castro, PMST .

FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2003, 26 (05) :479-486

[10] A three-dimensional finite element model for stress analysis of adhesive joints [J].

Gonçalves, JPM ;

de Moura, MFSF ;

de Castro, PMST .

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2002, 22 (05) :357-365

← 1 2 →