Fractionation of metals in street sediment samples by using the BCR sequential extraction procedure and multivariate statistical elucidation of the data

被引:310
作者
Kartal, S [1 ]
Aydin, Z [1 ]
Tokalioglu, S [1 ]
机构
[1] Erciyes Univ, Fac Arts & Sci, Dept Chem, TR-38039 Kayseri, Turkey
关键词
street sediment; metals; BCR sequential extraction; multivariate analysis; SRM; 2711;
D O I
10.1016/j.jhazmat.2005.11.091
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The concentrations of metals (Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn) in street sediment samples were determined by flame atomic absorption spectrometry (FAAS) using the modified BCR (the European Community Bureau of Reference) sequential extraction procedure. According to the BCR protocol for extracting the metals from the relevant target phases, 1.0 g of specimen of the sample was treated with 0.11 M acetic acid (exchangeable and bound to carbonates), 0.5 M hydroxylamine hydrochloride (bound to iron- and manganese-oxides), and 8.8 M hydrogen peroxide plus I M ammonium acetate (bound to sulphides and organics), sequentially. The residue was treated with aqua regia solution for recovery studies, although this step is not part of the BCR procedure. The mobility sequence based on the sum of the BCR sequential extraction stages was: Cd approximate to Zn (similar to 90%) > Pb (similar to 84%) > Cu (similar to 75%) > Mn (similar to 70%) > Co (similar to 57%) > Ni (similar to 43%) > Cr (similar to 40%) > Fe (similar to 17%). Enrichment factors as the criteria for examining the impact of the anthropogenic emission sources of heavy metals were calculated, and it was observed that the highest enriched elements were Cd, Pb, and Zn in the dust samples, average 190, 111, and 20, respectively. Correlation analysis (CA) and principal component analysis (PCA) were applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. PCA revealed that the sampling area was mainly influenced from three pollution sources, namely; traffic, industrial, and natural sources. The results show that chemical sequential extraction is a precious operational tool. Validation of the analytical results was checked by both recovery studies and analysis of the standard reference material (NIST SRM 2711 Montana Soil). (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:80 / 89
页数:10
相关论文
共 54 条
[1]   Distribution and mobility of metals in contaminated sites. Chemometric investigation of pollutant profiles [J].
Abollino, O ;
Aceto, M ;
Malandrino, M ;
Mentasti, E ;
Sarzanini, C ;
Barberis, R .
ENVIRONMENTAL POLLUTION, 2002, 119 (02) :177-193
[2]   Single particle characterization of size-fractionated road sediments [J].
Adachi, K ;
Tainosho, Y .
APPLIED GEOCHEMISTRY, 2005, 20 (05) :849-859
[3]  
Atgin RS, 2000, SPECTROCHIM ACTA B, V55, P1151
[4]  
AYDIN Z, 2002, THESIS ERCIYES U KAY
[5]   Heavy metal levels and solid phase speciation in street dusts of Delhi, India [J].
Banerjee, ADK .
ENVIRONMENTAL POLLUTION, 2003, 123 (01) :95-105
[6]  
BEVINGTON PR, 1969, DATA REDUCTION ERROR, P310
[7]   A critical evaluation of the three-stage BCR sequential extraction procedure to assess the potential mobility and toxicity of heavy metals in industrially-contaminated land [J].
Davidson, CM ;
Duncan, AL ;
Littlejohn, D ;
Ure, AM ;
Garden, LM .
ANALYTICA CHIMICA ACTA, 1998, 363 (01) :45-55
[8]   EVALUATION OF A SEQUENTIAL EXTRACTION PROCEDURE FOR THE SPECIATION OF HEAVY-METALS IN SEDIMENTS [J].
DAVIDSON, CM ;
THOMAS, RP ;
MCVEY, SE ;
PERALA, R ;
LITTLEJOHN, D ;
URE, AM .
ANALYTICA CHIMICA ACTA, 1994, 291 (03) :277-286
[9]   Effect of ultrasonic agitation on the release of copper, iron, manganese and zinc from soil and sediment using the BCR three-stage sequential extraction [J].
Davidson, CM ;
Delevoye, G .
JOURNAL OF ENVIRONMENTAL MONITORING, 2001, 3 (04) :398-403
[10]  
Florence T.M., 1989, TRACE ELEMENT SPECIA, P319