Investigations on hard turning with minimal cutting fluid application (HTMF) and its comparison with dry and wet turning

被引：179

作者：

Varadarajan, AS ^{[1
]}

Philip, PK ^{[1
]}

Ramamoorthy, B ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Mech Engn, Mfg Engn Sect, Madras 600036, Tamil Nadu, India

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2002年 / 42卷 / 02期

关键词：

hard turning; minimal; high velocity; thin pulsed jet;

D O I：

10.1016/S0890-6955(01)00119-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Environmental concerns call for the reduced use of cutting fluids in metal cutting practice. New cutting techniques are to be investigated to achieve this objective. Hard turning with Minimal Fluid application (HTMF) is one such technique, which can alleviate the pollution problems associated with cutting fluids. In-the-present work a specially formulated cutting fluid was applied as a high velocity, thin pulsed jet at the immediate cutting zones at an extremely low rate of 2 ml/min using a fluid application system developed for this purpose during turning of hardened steel. The performance of HTMF is studied in comparison with that of conventional hard turning in wet and dry form. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：193 / 200

页数：8

共 23 条

[1]

ALAXENDER R, 1998, P 18 ALL IND MAN TEC, V1, P83

[2]

Brockhoff T., 1998, Abras. J. Abras. Eng. Soc, V10, P38, DOI [10.12691/materials-4-1-1, DOI 10.12691/MATERIALS-4-1-1]

[3]

Chepe M.A., 1994, J I ENG INDIA, V75, P25

[4]

De Chiffre L., 1980, J SOC TRIBOLOGISTS L, V36, P514

[5] MECHANICS OF METAL-CUTTING AND CUTTING FLUID ACTION [J].

DECHIFFRE, L .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1977, 17 (04) :225-234

[6]

EZUGWU EO, 1991, J SOC TRIBOLOGISTS L, V47, P31

[7]

Heywood J.B., 1996, INTERNAL COMBUSTION

[8]

Hiroyasu T.K, 1974, SAE TRANSACT, V83, P715

[9]

Hutchings I.M., 1992, TRIBOLOGY FRICTION W

[10]

HYATT G, 1997, MANUFACTURING ENG, V118, P82

← 1 2 3 →