Partitioning of trace elements during the combustion of coal and biomass in a suspension-firing reactor

A novel, quartz 'suspension-firing' reactor is described for monitoring trace element release during solid fuel combustion under conditions relevant to fluidised bed combustors. The new design allows the examination of fuel particle combustion in the absence of bed solids. Experiments have been conducted using two coals, a sample of wood bark and one of straw. Ash from the reactor walls and base have been analysed separately from ash collected on a sintered disc in the path of exit gas. Trace element concentrations in these samples were analysed by Inductively Coupled Plasma (ICP)-mass spectrometry and ICP-atomic emission spectrometry (AES). The fractions of original trace elements retained by the ash have been reported; relative enrichment in the 'sinter-ash' was calculated by comparing with 'bottom ash'. Mercury was almost completely volatilised from all fuels, as was selenium for all except wood-bark. Chromium, manganese and thallium were partially volatilised and nickel mostly retained in all samples. The behaviour of beryllium, lead, molybdenum, vanadium and zinc varied, depending on the fuel sample. Beryllium was released to a greater extent from coal/straw than the other fuels. Vanadium was partially volatilised from wood-bark and coal/straw, while the largest proportion of the zinc released was from the wood-bark. Lead and molybdenum were retained to a greater extent by 'Colombian coal' and wood-bark, respectively. Evidence of the enrichment of certain trace elements on the finer 'sinter-ash' particles has also been observed, e.g. for As, Cd, Pb and TI during the combustion of the 'Colombian-coal'. (C) 2001 Elsevier Science Ltd. All rights reserved.