Phase diagrams for oil/methanol/ether mixtures

One-phase transmethylations of vegetable oils with methanol to form methyl esters occur considerably faster than conventional two-phase reactions. Addition of simple ethers is an efficient method for producing a single phase. Ternary phase diagrams have been determined at 23 degrees C for oil/methanol/ether mixtures; these are useful when applying the one-phase method across a wide range of conditions. Soybean, canola, palm, and coconut oils were used in combination with five ethers, namely, tetrahydrofuran (THF), 1,4-dioxane (DO), diethyl ether (DE), diisopropyl ether (DI), and tert-butyl methyl ether (TBM). All five ethers can produce miscibility for all methanol/oil compositions. The ether/methanol volumetric ratios required for miscibility at a methanol/soybean or canola oil volumetric ratio of 0.20 (5.4 molar ratio) at 23 degrees C are: THF, 1.15; DO, 1.60; DE, 1.38 DI, 1.57; and TBM, 1.57. For THF, this results in one-phase mixtures that contain 65 vol% oil. Soybean and canola oil form identical diagrams. Palm oil requires slightly less ether at the lower methanol concentrations, but coconut oil requires considerably less across the whole concentration range. Acid-catalyzed reactions, when performed at the boiling point of the most volatile component, require less ether than predicted from the diagrams.