Fracture detection using azimuthal variation of P-wave moveout from orthogonal seismic survey lines

An algorithm is proposed for determining the fracture orientation based on the azimuthal variations in the P-wave reflection moveout for a target interval. The differential moveout between orthogonal survey lines from the bottom of a given target shows cos 2 phi variations with the line azimuth phi measured from the fracture strike for a fixed offset. A configuration of four intersecting survey lines may be used to quantify the fracture strike. The four lines form two orthogonal pairs, and the fracture strike can be obtained by analyzing the crossplot of the two corresponding pairs of the differential moveouts. An offset-depth ratio (x/z) of 1.0 or greater (up to 1.5) is often required to quantify the moveout difference reliably. The sensitivity of the method is further enhanced by low/high impedance contrast at the top target interface but is greatly reduced by high/low impedance contrast. The method may be particularly useful in marine exploration with repeated surveys of various vintages where continuous azimuthal coverage is often not available. A data set from the North Sea is used to illustrate the technique.