Study of production route for titanium parts combining very high porosity and complex shape

被引:97
作者
Laptev, A [1 ]
Bram, M
Buchkremer, HP
Stöver, D
机构
[1] Forschoungzentrum Julich GmbH, Inst Werkstoffe & Verfahren Energietech, D-52425 Julich, Germany
[2] Donbass State Engn Acad, UA-84313 Kramatorsk, Ukraine
关键词
porous titanium; metal foam; pore forming; near net shape;
D O I
10.1179/003258904225015536
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The production of highly porous titanium parts of complex shape by powder metallurgical technology is described. Well defined porosity and pore sizes were achieved using a pore forming additive. This additive also enhances the strength of unsintered compacts, allowing machining in the green state. The requirements of the initial powders and pecularities of each production step are discussed in detail. The microstructure of porous materials and examples of net shape parts are given, aiming preferentially at biomedical applications. The impurities of the obtained titanium parts are compared with the requirements of the ISO standard for titanium implants.
引用
收藏
页码:85 / 92
页数:8
相关论文
共 21 条
[1]  
[Anonymous], 1982, HDB POWDER METALLURG
[2]   Ti-Al-V powder metallurgy (PM) via the hydrogenation-dehydrogenation (HDH) process [J].
Azevedo, CRF ;
Rodrigues, D ;
Neto, FB .
JOURNAL OF ALLOYS AND COMPOUNDS, 2003, 353 (1-2) :217-227
[3]  
Bram M, 2000, ADV ENG MATER, V2, P196, DOI 10.1002/(SICI)1527-2648(200004)2:4<196::AID-ADEM196>3.0.CO
[4]  
2-K
[5]  
Bram M, 2000, MATERIALWISS WERKST, V31, P497, DOI 10.1002/1521-4052(200006)31:6<497::AID-MAWE497>3.3.CO
[6]  
2-O
[7]  
BRAM M, 2001, CELLULAR METALS MATA, P215
[8]  
BRAM M, 2000, PM2000 WORLD C POWD, P1131
[9]  
BREME J, 1996, ITTAN TITANLEGIERUNG, P205
[10]  
BUCHKREMER HP, 1998, Patent No. 19726961