Selective Laser Melting of Ti-45Nb Alloy

被引：94

作者：

Schwab, Holger ^{[1
]}

Prashanth, Konda Gokuldoss ^{[1
]}

Loeber, Lukas ^{[1
]}

Kuehn, Uta ^{[1
]}

Eckert, Juergen ^{[1
,2
]}

机构：

[1] IFW Dresden, Inst Komplexe Mat, D-01171 Dresden, Germany

[2] Tech Univ Dresden, Inst Werkstoffwissensch, D-01062 Dresden, Germany

来源：

METALS | 2015年 / 5卷 / 02期

关键词：

COMMERCIALLY PURE TITANIUM; MECHANICAL-PROPERTIES; POWDER; MICROSTRUCTURE; TRACK; BEHAVIOR; TEXTURE; PARTS;

D O I：

10.3390/met5020686

中图分类号：

T [工业技术];

学科分类号：

120111 [工业工程];

摘要：

Ti-45Nb is one of the potential alloys that can be applied for biomedical applications as implants due to its low Young's modulus. Ti-45Nb (wt.%) gas atomized powders were used to produce bulk samples by selective laser melting with three different parameter sets (energy inputs). A beta-phase microstructure consisting of elliptical grains with an enriched edge of titanium was observed by scanning electron microscopy and X-ray diffraction studies. The mechanical properties of these samples were evaluated using hardness and compression tests, which suggested that the strength of the samples increases with increasing energy input within the range considered.

引用

页码：686 / 694

页数：9

共 28 条

[1]

[Anonymous], 2010, P 16 INT S EL

[2]

Effect of IN718 recycled powder reuse on properties of parts manufactured by means of Selective Laser Melting [J].

Ardila, L. C. ;

Garciandia, F. ;

Gonzalez-Diaz, J. B. ;

Alvarez, P. ;

Echeverria, A. ;

Petite, M. M. ;

Deffley, R. ;

Ochoa, J. .

8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014), 2014, 56 :99-107

[3]

Comparison of wear properties of commercially pure titanium prepared by selective laser melting and casting processes [J].

Attar, H. ;

Prashanth, K. G. ;

Chaubey, A. K. ;

Calin, M. ;

Zhang, L. C. ;

Scudino, S. ;

Eckert, J. .

MATERIALS LETTERS, 2015, 142 :38-41

[4]

Manufacture by selective laser melting and mechanical behavior of commercially pure titanium [J].

Attar, H. ;

Calin, M. ;

Zhang, L. C. ;

Scudino, S. ;

Eckert, J. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 593 :170-177

[5]

Electron beam melting of Ti-48Al-2Cr-2Nb alloy: Microstructure and mechanical properties investigation [J].

Biamino, S. ;

Penna, A. ;

Ackelid, U. ;

Sabbadini, S. ;

Tassa, O. ;

Fino, P. ;

Pavese, M. ;

Gennaro, P. ;

Badini, C. .

INTERMETALLICS, 2011, 19 (06) :776-781

[6]

Elastic softening of β-type Ti-Nb alloys by indium (In) additions [J].

Calin, Mariana ;

Helth, Arne ;

Moreno, Julio J. Gutierrez ;

Boenisch, Matthias ;

Brackmann, Varvara ;

Giebeler, Lars ;

Gemming, Thomas ;

Lekka, Christina E. ;

Gebert, Annett ;

Schnettler, Reinhard ;

Eckert, Juergen .

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2014, 39 :162-174

[7]

Grain boundary character distribution and texture evolution in cold-drawn Ti-45Nb wires [J].

Chen, Yi ;

Li, Jinshan ;

Tang, Bin ;

Kou, Hongchao ;

Zhang, Fengshou ;

Chang, Hui ;

Zhou, Lian .

MATERIALS LETTERS, 2013, 98 :254-257

[8]

EPPLE M, 2003, BIOMATERIALIEN BIOMA

[9]

Surface treatment, corrosion behavior, and apatite-forming ability of Ti-45Nb implant alloy [J].

Gostin, Petre F. ;

Helth, Arne ;

Voss, Andrea ;

Sueptitz, Ralph ;

Calin, Mariana ;

Eckert, Juergen ;

Gebert, Annett .

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2013, 101B (02) :269-278

[10]

Prediction of stress shielding around an orthopedic screw: Using stress and strain energy density as mechanical stimuli [J].

Haase, Kristina ;

Rouhi, Gholamreza .

COMPUTERS IN BIOLOGY AND MEDICINE, 2013, 43 (11) :1748-1757

← 1 2 3 →