In the military aerospace community, most hydraulic fluid pumps and components are currently being stored in rust inhibited fluids containing barium dinonylnaphthalene sulfonate (BSN). Fluids containing barium are hazardous waste after use, with expensive disposal, and have caused operational problems in aircraft hydraulic systems including helicopters and fighter aircraft. In this program, bearings and pistons were stored in jars containing both operational hydraulic fluids (MIL-PRF-83282, MIL-PRF-87257, and MIL-PRF-5606) and rust-inhibited hydraulic fluids containing BSN (MIL-PRF-46170 and MIL-PRF-6083). In addition, hydraulic pumps were filled with MIL-PRF-83282, MIL-PRF-87257, and MIL-PRF-46170. Hydraulic pumps were not filled with MIL-PRF-5606 or MIL-PRF-6083 because these hydraulic fluids are being phased out of military aerospace applications as operational and storage fluids, respectively. Jars, containing bearings and pistons, as well as hydraulic pumps, were stored for tip to three years in a laboratory environment to determine if operational fluids would protect them from rusting during storage. After each year, the bearings, pistons, and pumps were inspected for corrosion. At the end of three years of storage, pumps were endurance tested using fresh operational fluid, MIL-PRF-83282. The bearings, pistons, and pumps showed no rusting for the duration of storage with either operational or storage fluids. The pumps stored with the operational fluids, MIL-PRF-83282 and MIL-PRF-87257, were in better condition than the pump stored with the rust-inhibited fluid. The operational hydraulicfluids, MIL-PRF-83282 and MIL-PRF-87257, provided excellent protection against rusting during storage.