Preparation and characterisation of titanium dioxide films for catalytic applications generated by anodic spark deposition

The advanced plasma electrochemical process of anodic spark deposition (ASD) was used to generate photoactive titanium dioxide films on titanium metal Substrates. A shift to easier-to-machine substrates was demonstrated by the deposition of a titanium film with physical vapour deposition onto different materials such as glass, silicon, and stainless steel prior to ASD. Obtained films were characterised by scanning electron microscopy, surface area measurement (Brunnauer-Emmett-Teller method, BET), X-ray diffraction, electron-probe microanalysis, and glow discharge spectroscopy. Additionally, film thickness was determined by eddy current measurements. Standard ASD conditions were defined as 180 V applied voltage over a 180 s hold time, a voltage ramp of 20 V/s, a duty cycle of 0.5 and a frequency of 1500 Hz. Most prominent characteristics of the titanium films produced under these standard conditions are a film thickness of less than or equal to 80 mum, a surface area of approximately 51 m(2)/g (BET) and an anatase content of approximately 30% and rutile content of approximately 70%. Furthermore, the film formation process is elucidated and the dependence of film thickness on deposition time and the dependence of the anatase and rutile content on the deposited mass are shown for varying ASD conditions. (C) 2003 Elsevier B.V. All rights reserved.