Glass foams from dismantled cathode ray tubes

被引：152

作者：

Bernardo, Enrico ^{[1
]}

Albertini, Francesca ^{[1
]}

机构：

[1] Univ Padua, Dipartimento Ingn Meccan, Settore Mat, I-35131 Padua, Italy

来源：

CERAMICS INTERNATIONAL | 2006年 / 32卷 / 06期

关键词：

sintering; mechanical properties; glass; thermal applications;

D O I：

10.1016/j.ceramint.2005.04.019

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Glasses from dismantled cathode ray tubes (CRTs) represent a pressing environmental problem, since their direct reutilization in manufacturing the original glass components is very difficult. The most hardly recycled glass, panel glass, has been employed for the manufacturing of glass foams, intended for thermal and acoustic insulation, by sintering of a mixture of glass and calcium carbonate powder mixture. In this work, we illustrate the effects of the heating rate, the holding time and the concentration of carbonate, employed as foaming agent, in the same sintering process, on the relation between density and crushing strength. Due to the observed mechanical properties and the results of preliminary thermal conductivity tests the obtained materials were found to approach commercial glass foams. (C) 2005 Elsevier Ltd and Techna Group S.r.l. All rights reserved.

引用

页码：603 / 608

页数：6

共 18 条

[1]

Bayer G., 1979, RIV STN SPER VETRO, V9, P310

[2] Development and mechanical characterization of Al2O3 platelet-reinforced glass matrix composites obtained from glasses coming from dismantled cathode ray tubes [J].

Bernardo, E ;

Scarinci, G ;

Hreglich, S .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2005, 25 (09) :1541-1550

[3]

Bernardo E, 2005, GLASS SCI TECHNOL, V78, P7

[4] Glass matrix composites from coal flyash and waste glass [J].

Boccaccini, AR ;

Bucker, M ;

Bossert, J ;

Marszalek, K .

WASTE MANAGEMENT, 1997, 17 (01) :39-45

[5] Inertization and reuse of waste materials by vitrification and fabrication of glass-based products [J].

Colombo, P ;

Brusatin, G ;

Bernardo, E ;

Scarinci, G .

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2003, 7 (03) :225-239

[6]

Ducman V., 1997, Key Engineering Materials, V132-1363, P2264

[7]

GIBSON LJ, 1999, STRUCTURE PROPERTIES, P209

[8]

GUTMAN R, 1996, GLASTECH BER, V69, P223

[9]

Hreglich S., 2001, P INT S REC REUS GLA, P123

[10]

Long B., 1934, US Patent, Patent No. 1945052

← 1 2 →