A CTOD-based mixed-mode fracture criterion

被引:69
作者
Ma, FS [1 ]
Deng, XM [1 ]
Sutton, MA [1 ]
Newman, JC [1 ]
机构
[1] Univ S Carolina, Dept Mech Engn, Columbia, SC 29208 USA
来源
MIXED-MODE CRACK BEHAVIOR | 1999年 / 1359卷
关键词
mixed-mode fracture criterion; crack kinking; crack-tip opening displacement; CTOD;
D O I
10.1520/STP14245S
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
This paper presents a mixed-mode fracture criterion that uses the crack-tip opening displacement (CTOD) at a fixed distance behind the crack tip as the fracture parameter This criterion is developed based on a detailed analysis of crack kinking in arbitrary directions. in essence, the proposed criterion states that crack growth occurs when the current CTOD reaches a critical value and the direction of crack growth is the direction that causes either the opening or the shearing CTOD component at the new crack tip to be the absolute maximum. Under linearly elastic conditions, it is shown that this criterion is equivalent to several commonly accepted mixed-mode criteria and predicts that crack growth will occur in a locally Mode I manner. Under elastic-plastic conditions, the mixed-mode: CTOD criterion predicts that clack growth will be along either a local Mode I or a local Mode II direction. The prediction of the abrupt transition from Mode I-dominated crack growth to Mode II-dominated crack is in good agreement with the observation of the mixed-mode fracture test results from the Arcan specimens. Alternative forms or extensions of this criterion are also discussed.
引用
收藏
页码:86 / 110
页数:25
相关论文
共 30 条
[1]  
Amstutz B.E., 1995, ASTM special technical publication, V1256, P256
[2]  
AMSTUTZ BE, 1997, ASTM STP, V1296
[3]  
[Anonymous], 1978, MECH TODAY
[4]   METHOD TO PRODUCE UNIFORM PLANE-STRESS STATES WITH APPLICATIONS TO FIBER-REINFORCED MATERIALS [J].
ARCAN, M ;
HASHIN, Z ;
VOLOSHIN, A .
EXPERIMENTAL MECHANICS, 1978, 18 (04) :141-146
[5]   SLIGHTLY CURVED OR KINKED CRACKS [J].
COTTERELL, B ;
RICE, JR .
INTERNATIONAL JOURNAL OF FRACTURE, 1980, 16 (02) :155-169
[6]   CTOA AND CRACK-TUNNELING MEASUREMENTS IN THIN SHEET 2024-T3 ALUMINUM-ALLOY [J].
DAWICKE, DS ;
SUTTON, MA .
EXPERIMENTAL MECHANICS, 1994, 34 (04) :357-368
[7]  
Dawicke DS, 1995, AM SOC TEST MATER, V1220, P358, DOI 10.1520/STP14604S
[8]  
DAWICKE DS, 1997, NASA AIRFR STRUCT IN
[9]  
DENG X, 1997, 4 US NAT C COMP MECH
[10]  
DENG X, 1997, 110332 NASA LANGL RE