The high strain rate compressive behaviour of polycarbonate and polyvinylidene difluoride

被引:180
作者
Siviour, CR [1 ]
Walley, SM [1 ]
Proud, WG [1 ]
Field, JE [1 ]
机构
[1] Univ Cambridge, Cavendish Lab, Dept Phys, PCS Grp, Cambridge CB3 0HE, England
基金
英国工程与自然科学研究理事会;
关键词
split Hopkinson pressure bar; polycarbonate; polyvinylidene difluoride;
D O I
10.1016/j.polymer.2005.10.109
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Measurements are presented of the compressive stress-strain behaviour of polycarbonate (PC) and polyvinylidene difluoride (PVDF) at strain rates from 10(-4) to 10(4) s(-1) at room temperature, and temperatures from -50 to + 150 degrees C at 10(3) s(-1). These results, obtained using a split Hopkinson pressure bar and Instron testing machine, are supported by dynamic mechanical analysis (DMA) measurements on the materials. Previous researchers have observed that the yield stress of these materials is bilinearly dependent on the logarithm of strain rate. The data presented here show that the bilinearity is due to the movement of low order transitions in the materials, so that they occur at temperatures above room temperature at the higher strain rates. In particular, these transitions are the 0 transition in PC, and the glass transition in PVDF. In addition, Appendix A presents measurements of a high strain rate Poisson's ratio of polycarbonate and its evolution with strain. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:12546 / 12555
页数:10
相关论文
共 34 条
[1]   Drops in the flow stress of semi-crystalline polymers at very high rates of strain [J].
Al-Maliky, N ;
Fernandez, JO ;
Parry, DJ ;
Swallowe, GM .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1998, 17 (13) :1141-1143
[2]   A freely expanding ring technique for measuring the tensile properties of polymers [J].
AlMaliky, NS ;
Parry, DJ .
MEASUREMENT SCIENCE AND TECHNOLOGY, 1996, 7 (05) :746-752
[4]   COMPRESSION YIELD BEHAVIOR OF POLYMETHYL METHACRYLATE OVER A WIDE-RANGE OF TEMPERATURES AND STRAIN-RATES [J].
BAUWENSCROWET, C .
JOURNAL OF MATERIALS SCIENCE, 1973, 8 (07) :968-979
[5]  
BAUWENSCROWET C, 1972, J MATER SCI, V7, P176, DOI 10.1007/BF02403504
[6]  
BISILLIAT ML, 1997, P 10 INT C DEF YIELD, P203
[7]  
Blumenthal WR, 2002, AIP CONF PROC, V620, P665, DOI 10.1063/1.1483626
[8]  
Bowden P. B., 1973, Physics of glassy polymers, P279
[9]  
BRISCOE BJ, 1985, POLYM COMMUN, V26, P307
[10]   IMPACT YIELDING OF HIGH-DENSITY POLYETHYLENE [J].
BRISCOE, BJ ;
HUTCHINGS, IM .
POLYMER, 1976, 17 (12) :1099-1102