Room-temperature stationary sodium-ion batteries for large-scale electric energy storage

被引:2962
作者
Pan, Huilin [1 ]
Hu, Yong-Sheng [1 ]
Chen, Liquan [1 ]
机构
[1] Chinese Acad Sci, Inst Phys, Beijing Natl Lab Condensed Matter Phys, Beijing Key Lab New Energy Mat & Devices,Key Lab, Beijing 100190, Peoples R China
关键词
RECHARGEABLE LITHIUM BATTERIES; OXIDE INTERGROWTH ELECTRODES; PERFORMANCE ANODE MATERIAL; SUPERIOR RATE CAPABILITY; RATE CATHODE MATERIAL; LONG CYCLE LIFE; ELECTROCHEMICAL PROPERTIES; HIGH-CAPACITY; LOW-COST; POSITIVE-ELECTRODE;
D O I
10.1039/c3ee40847g
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Room-temperature stationary sodium-ion batteries have attracted great attention particularly in large-scale electric energy storage applications for renewable energy and smart grid because of the huge abundant sodium resources and low cost. In this article, a variety of electrode materials including cathodes and anodes as well as electrolytes for room-temperature stationary sodium-ion batteries are briefly reviewed. We compare the difference in storage behavior between Na and Li in their analogous electrodes and summarize the sodium storage mechanisms in the available electrode materials. This review also includes some new results from our group and our thoughts on developing new materials. Some perspectives and directions on designing better materials for practical applications are pointed out based on knowledge from the literature and our experience. Through this extensive literature review, the search for suitable electrode and electrolyte materials for stationary sodium-ion batteries is still challenging. However, after intensive research efforts, we believe that low-cost, long-life and room-temperature sodium-ion batteries would be promising for applications in large-scale energy storage system in the near future.
引用
收藏
页码:2338 / 2360
页数:23
相关论文
共 194 条
[1]   Sodium insertion in carboxylate based materials and their application in 3.6 V full sodium cells [J].
Abouimrane, Ali ;
Weng, Wei ;
Eltayeb, Hussameldin ;
Cui, Yanjie ;
Niklas, Jens ;
Poluektov, Oleg ;
Amine, Khalil .
ENERGY & ENVIRONMENTAL SCIENCE, 2012, 5 (11) :9632-9638
[2]   NiCo2O4 spinel:: First report on a transition metal oxide for the negative electrode of sodium-ion batteries [J].
Alcántara, R ;
Jaraba, M ;
Lavela, P ;
Tirado, JL .
CHEMISTRY OF MATERIALS, 2002, 14 (07) :2847-+
[3]   A wide-ranging review on Nasicon type materials [J].
Anantharamulu, N. ;
Rao, K. Koteswara ;
Rambabu, G. ;
Kumar, B. Vijaya ;
Radha, Velchuri ;
Vithal, M. .
JOURNAL OF MATERIALS SCIENCE, 2011, 46 (09) :2821-2837
[4]  
Armand M, 2009, NAT MATER, V8, P120, DOI [10.1038/nmat2372, 10.1038/NMAT2372]
[5]   A symmetrical lithium-ion cell based on lithium vanadium fluorophosphate, LiVPO4F [J].
Barker, J ;
Gover, RKB ;
Burns, P ;
Bryan, A .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2005, 8 (06) :A285-A287
[6]   A comparative investigation of the Li insertion properties of the novel fluorophosphate phases, NaVPO4FandLiVPO4F [J].
Barker, J ;
Saidi, MY ;
Swoyer, JL .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2004, 151 (10) :A1670-A1677
[7]   A sodium-ion cell based on the fluorophosphate compound NaVPO4F [J].
Barker, J ;
Saidi, MY ;
Swoyer, JL .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2003, 6 (01) :A1-A4
[8]   A new polymorph of Na2MnP2O7 as a 3.6 V cathode material for sodium-ion batteries [J].
Barpanda, Prabeer ;
Ye, Tian ;
Avdeev, Maxim ;
Chung, Sai-Cheong ;
Yamada, Atsuo .
JOURNAL OF MATERIALS CHEMISTRY A, 2013, 1 (13) :4194-4197
[9]   A layer-structured Na2CoP2O7 pyrophosphate cathode for sodium-ion batteries [J].
Barpanda, Prabeer ;
Lu, Jiechen ;
Ye, Tian ;
Kajiyama, Masataka ;
Chung, Sai-Cheong ;
Yabuuchi, Naoaki ;
Komaba, Shinichi ;
Yamada, Atsuo .
RSC ADVANCES, 2013, 3 (12) :3857-3860
[10]   Sodium iron pyrophosphate: A novel 3.0 V iron-based cathode for sodium-ion batteries [J].
Barpanda, Prabeer ;
Ye, Tian ;
Nishimura, Shin-ichi ;
Chung, Sai-Cheong ;
Yamada, Yuki ;
Okubo, Masashi ;
Zhou, Haoshen ;
Yamada, Atsuo .
ELECTROCHEMISTRY COMMUNICATIONS, 2012, 24 :116-119