Effects of chromium on the structural, surface chemistry and electrochemical of layered LiNi0.8-xCo0.1Mn0.1CrxO2

被引:61
作者
Li, Ling-jun [1 ]
Wang, Zhi-Xing [2 ]
Liu, Qi-Cheng [1 ]
Ye, Chang [1 ]
Chen, Zhao-Yong [1 ]
Gong, Li [1 ]
机构
[1] Changsha Univ Sci & Technol, Sch Phys & Elect Sci, Changsha 410114, Hunan, Peoples R China
[2] Cent S Univ, Sch Met Sci & Engn, Changsha 410083, Hunan, Peoples R China
关键词
Lithium ion battery; Positive material; LiNi0.8Co0.1Mn0.1O2; Cr substitution; Surface chemistry; LITHIUM-ION BATTERIES; CATHODE MATERIALS; THERMAL-STABILITY; IN-SITU; PERFORMANCE; COPRECIPITATION; SAFETY; OXIDES; LIFE; CELL;
D O I
10.1016/j.electacta.2012.05.076
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Single phase LiNi0.8-xCo0.1Mn0.1CrxO2 (x = 0, 0.01, 0.02, and 0.03) compounds have been prepared by fast co-precipitation and anneal method. Electrochemical tests show that the sample b, with 1% Cr content, exhibits the highest discharge capacity, enhanced rate ability and cycling property among all samples. From the combination of Rietveld refinements, ICP, EDAX and XPS studies, it is supposed that the electrochemical improvement may be related to the suppressed cation mixing degree and reduced surface concentration of Ni ions, caused by Cr substitution. However, excess Cr substitution could also result in the appearance of Cr6+ and Mn3+ ions, which are mainly responsible for the capacity fading of positive materials. Therefore, Cr substitution should be controlled in reasonable range. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:89 / 96
页数:8
相关论文
共 40 条
[1]   Local structure and first cycle redox mechanism of layered Li1.2Cr0.4Mn0.4O2 cathode material [J].
Ammundsen, B ;
Paulsen, J ;
Davidson, I ;
Liu, RS ;
Shen, CH ;
Chen, JM ;
Jang, LY ;
Lee, JF .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (04) :A431-A436
[2]   Electrochemical and thermal behavior of LiNi1-zMzO2 (M = Co, Mn, Ti) [J].
Arai, H ;
Okada, S ;
Sakurai, Y ;
Yamaki, J .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1997, 144 (09) :3117-3125
[3]   Safety characteristics of Li(Ni0.8Co0.15Al0.05)O2 and Li(Ni1/3CO1/3Mn1/3)O2 [J].
Belharouak, I ;
Lu, WQ ;
Vissers, D ;
Amine, K .
ELECTROCHEMISTRY COMMUNICATIONS, 2006, 8 (02) :329-335
[4]   Design, demonstrations and sustainability impact assessments for plug-in hybrid electric vehicles [J].
Bradley, Thomas H. ;
Frank, Andrew A. .
RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2009, 13 (01) :115-128
[5]   7Li MAS NMR study of electrochemically deintercalated LixNi0.30Co0.70O2 phases:: evidence of electronic and ionic mobility, and redox processes [J].
Carlier, D ;
Ménétrier, M ;
Delmas, C .
JOURNAL OF MATERIALS CHEMISTRY, 2001, 11 (02) :594-603
[6]   LiNi0.74Co0.26-xMgxO2 cathode material for a Li-ion cell [J].
Cho, J .
CHEMISTRY OF MATERIALS, 2000, 12 (10) :3089-3094
[7]   Effect of preparation methods of LiNi1-xCoxO2 cathode materials on their chemical structure and electrode performance [J].
Cho, J ;
Kim, G ;
Lim, HS .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (10) :3571-3576
[8]   Synthesis, thermal, and electrochemical properties of AlPO4-coated LiNi0.8Co0.1Mn0.1O2 cathode materials for a Li-ion cell [J].
Cho, J ;
Kim, TJ ;
Kim, J ;
Noh, M ;
Park, B .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2004, 151 (11) :A1899-A1904
[9]   LiNi0.8Co0.15Al0.05O2 cathode materials prepared by TiO2 nanoparticle coatings on Ni0.8Co0.15Al0.05(OH)2 Precursors [J].
Cho, Younghyun ;
Lee, Yong-Seok ;
Park, Seul-A ;
Lee, Youngil ;
Cho, Jaephil .
ELECTROCHIMICA ACTA, 2010, 56 (01) :333-339
[10]   Segregation Tendency in Layered Aluminum-Substituted Lithium Nickel Oxides [J].
Croguennec, L. ;
Shao-Horn, Y. ;
Gloter, A. ;
Colliex, C. ;
Guilmard, M. ;
Fauth, F. ;
Delmas, C. .
CHEMISTRY OF MATERIALS, 2009, 21 (06) :1051-1059