Effect of compositional gradient on thermal behavior of synthetic graphite-phenolic nanocomposites

被引:28
作者
Bafekrpour, Ehsan [1 ]
Simon, George P. [2 ]
Yang, Chunhui [3 ]
Habsuda, Jana [2 ]
Naebe, Minoo [1 ]
Fox, Bronwyn [1 ]
机构
[1] Deakin Univ, Inst Frontier Mat, Geelong, Vic 3220, Australia
[2] Monash Univ, Dept Mat Engn, Clayton, Vic 3800, Australia
[3] Deakin Univ, Sch Engn, Geelong, Vic 3220, Australia
关键词
Synthetic graphite; Phenolic; Nanocomposites; Thermal conductivity; Heat capacity; Finite element modelling; Transient heat transfer; RESIDUAL-STRESSES; CONDUCTIVITY; TEMPERATURE; CARBON; GLASS;
D O I
10.1007/s10973-012-2386-3
中图分类号
O414.1 [热力学];
学科分类号
摘要
Synthetic graphite-phenolic nanocomposites were designed and synthesized with a compositional gradient which is shown to influence transient temperature fields during rapid temperature changes. Such nanocomposites were fabricated using a compression moulding technique, and thermal conductivity and heat capacity of nanocomposites were experimentally determined using a modified transient plane source technique over a wide temperature range from 253.15 to 373.15 K. The effects of four compositional gradient configurations on the transient temperature field across the thickness of a nanocomposite plate, at a high imposed temperature, was investigated. The transient time and temperature fields in nanocomposite structures were highly affected by the compositional gradient configurations.
引用
收藏
页码:1169 / 1176
页数:8
相关论文
共 22 条
[1]   Numerical simulation and experimental analysis of an industrial glass melting furnace [J].
Abbassi, A. ;
Khoshmanesh, Kh. .
APPLIED THERMAL ENGINEERING, 2008, 28 (5-6) :450-459
[2]   Transient temperature distribution in composites with layers of functionally graded materials (FGMs) [J].
Agarwal, B ;
Upadhyay, PC ;
Banta, L ;
Lyons, D .
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2006, 25 (05) :513-542
[3]   Thermal Residual Stresses in Adhesively Bonded In-plane Functionally Graded Clamped Plates Subjected to an Edge Heat Flux [J].
Apalak, M. Kemal ;
Bagci, M. Didem .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (15) :1861-1908
[4]   THERMAL RESIDUAL STRESSES IN ONE-DIRECTIONAL FUNCTIONALLY GRADED PLATES SUBJECTED TO IN-PLANE HEAT FLUX [J].
Bagci, M. Didem ;
Apalak, M. Kemal .
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2011, 60 (01) :50-83
[5]   Mechanical and electrical property enhancement in exfoliated graphene nanoplatelet/liquid crystalline polymer nanocomposites [J].
Biswas, Sanjib ;
Fukushima, Hiroyuki ;
Drzal, Lawrence T. .
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (04) :371-375
[6]   Epoxy- and Polyester-Based Composites Reinforced With Glass, Carbon and Aramid Fabrics: Measurement of Heat Capacity and Thermal Conductivity of Composites by Differential Scanning Calorimetry [J].
Cecen, Volkan ;
Tavman, Ismail H. ;
Kok, Mediha ;
Aydogdu, Yildirim .
POLYMER COMPOSITES, 2009, 30 (09) :1299-1311
[7]   Functionally graded material: a parametric study on thermal-stress characteristics using the Crank-Nicolson-Galerkin scheme [J].
Cho, JR ;
Oden, JT .
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2000, 188 (1-3) :17-38
[8]   Thermal conductivity of exfoliated graphite nanocomposites [J].
Fukushima, H. ;
T Drzal, L. ;
Rook, B. P. ;
Rich, M. J. .
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2006, 85 (01) :235-238
[9]   Improved thermal conductivity for chemically functionalized exfoliated graphite/epoxy composites [J].
Ganguli, Sabyasachi ;
Roy, Ajit K. ;
Anderson, David P. .
CARBON, 2008, 46 (05) :806-817
[10]  
Hibbitt D., 2009, ABAQUS user's manual