Improvement of the interlaminar fracture toughness of composite laminates by whisker reinforced interlamination

被引：66

作者：

Wang, WX ^{[1
]}

Takao, Y ^{[1
]}

Matsubara, T ^{[1
]}

Kim, HS ^{[1
]}

机构：

[1] Kyushu Univ, Res Inst Appl Mech, Fukuoka 8168580, Japan

来源：

COMPOSITES SCIENCE AND TECHNOLOGY | 2002年 / 62卷 / 06期

关键词：

composite laminates;

D O I：

10.1016/S0266-3538(02)00052-0

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this study, an attempt is made to improve the interlaminar fracture toughness of composite laminates by distributing whiskers along the interface of composite laminates during the lay-up process. Commercially available T800H/3631 CFRP prepreg and beta-SiC whisker are employed to prepare the specimens. A simple spray method is developed to distribute whiskers on the prepreg. Unidirectional laminates of 24 plies with whisker reinforced interlamination are made. The conventional double cantilever beam (DCB) and end loaded split (ELS) tests are conducted to investigate the effects of whiskers on the Mode I and Mode II interlaminar fracture toughness, respectively. Microscopic analysis of the side-edge, cross-section and fracture surface of specimens is performed by optical microscopic, scanning electron microscope (SEM) and electron probe micro-analyzer (EPMA) to investigate the distribution of whiskers and the improvement mechanism of the distributed whiskers on the fracture toughness. (C) 2002 Elsevier Science Ltd. All rights reserved.

引用

页码：767 / 774

页数：8

共 14 条

[1]

[Anonymous], 1993, 70861993 JISK, P651

[2]

CARTIE DDR, 1999, P ICCM 12 PAR

[3]

Chou T. W., 1989, Textile Structural Composites

[4] On the effects of stitching in CFRPs - I. Mode I delamination toughness [J].

Dransfield, KA ;

Jain, LK ;

Mai, YW .

COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (06) :815-827

[5]

FREITAS G, 1994, J ADV MATER, V25, P36

[6]

ITO M, 1995, P ICCM 10 WHISTL BRI, V3, P213

[7]

KAGEYAMA K, 1992, J JAP SOC COMP MAT, V18, P158

[8]

LIU HY, 2001, P ICCM 13 BEIJ

[9]

Mignery L.A., 1985, ASTM STP, V876, P371, DOI DOI 10.1520/STP36315S

[10] A mechanistic approach to the properties of stitched laminates [J].

Mouritz, AP ;

Cox, BN .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2000, 31 (01) :1-27

← 1 2 →